The Power-All PA-9 Digital Power Supply is the world’s first 2,000 mA, single outlet power supply designed specifically for guitar effect users. Don’t waste money on batteries or take up valuable space with multiple “wall wart” adaptors or power bricks – the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet!
The Power-All provides 9 volts DC at 2,000 milliamps – more than enough current to power dozens of effect pedals, including up to four Line 6 Modelers! The Power-All’s special circuit design offers the lowest noise floor of any digital power supply on the market. The PA-9 now comes with a ferrite-core filter built onto its output cable to further reduce noise and hum. The PA-9 automatically converts any input voltage to 9 VDC, allowing it to be used anywhere around the world!
The Power-All Basic Kit can power five pedals out of the box, while the Power-All Deluxe Kit can power eleven pedals. Both kits come with a variety of jumper cables that allow connections of phone plug, reverse polarity, digital, and battery-only pedal types.
The Power-All Kits feature:
- 9-Volt DC regulated, 2000 milliamp digital power supply
- LIFETIME WARRANTY – never buy another power supply
- Power all your pedals from a single power supply
- Takes up only one outlet space
- Replaces Boss PSA-120, DOD PS-200R, Morley 9V, DanElectro DA-1, Dunlop ECB-003, Ibanez AC-109, Guyatone AC-2, Maxon AC210N, Zoom AD-0006 and just about any other 9 VDC power adaptor
- Special, low-noise circuitry reduces ripple current and hum
- Powers 9 VDC effects from any electrical outlet in the world
- New Ten-Foot, 18-gauge output cable allows for longer power runs without the need for an extension cord.
Kits include:
Basic Kit
Deluxe Kit
1 × Power-All Power Supply (M-PAS-S)
1 × Power-All Power Supply (M-PAS-S)
1 × 11/R Cable (M-PAS-CABLE-2)
Eleven-connector right-angle Daisy Chain with spring-loaded jacks for extra secure connections – no more losing power mid-solo!
1 × 5/R Cable (M-PAS-CABLE-1)
Five-connector right-angle Daisy Chain with spring-loaded jacks for extra secure connections – no more losing power mid-solo!
1 × Blue Cable (M-PAS-CABLE-4)
3.5 mm Phone Plug Jumper Cable for EH and other vintage pedals
1 × Blue Cable (M-PAS-CABLE-4)
3.5 mm Phone Plug Jumper Cable for EH and other vintage pedals
1 × Green Cable (M-PAS-CABLE-5)
Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other pedals requiring a 2.5 mm internal diameter jack
1 × Green Cable (M-PAS-CABLE-5)
Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other pedals requiring a 2.5 mm internal diameter jack
1 × Grey Cable (M-PAS-CABLE-6)
Battery Clip Jumper Cables for pedals with no AC input
1 × Grey Cable (M-PAS-CABLE-6)
Battery Clip Jumper Cables for pedals with no AC input
1 × Red/R Cable (M-PAS-CABLE-7)
Right-angle Reverse Polarity Jumper Cable with spring-loaded jack for powering tip positive pedals
1 × Red/R Cable (M-PAS-CABLE-7)
Right-angle Reverse Polarity Jumper Cable with spring-loaded jack for powering tip positive pedals
1 × Black Extension Cable (M-PAS-CABLE-3)
Right-angle Extension Cable provides an additional 10.5” of length for longer power runs, oversized pedals or hard-to-reach power jacks.
3 × Cable Cap (M-PAS-CABLECAP)
Insulator sheaths to cover power leads when not in use
5 × Cable Cap (M-PAS-CABLECAP)
Insulator sheaths to cover power leads when not in use
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
Product MeasurementsItem Length: 3.06 in.
Item Width: 1.3 in.
Depth: 2.66 in.
