Red Panda Labs Remote 4 Switch

 FREE SHIPPING
 BEST PRICE PROMISE
 FOREVER SUPPORT

Tensor remote switch with 4 modes to access presets and pedal functions.  Scribble strips above each switch can be labeled with a Sharpie and erased using isopropyl alcohol.

Connects to the Tensor or Particle 2 via a 1/4" TRS cable (included).  The Tensor firmware needs to be version 1.1 or later.  The Remote 4 does not require power.

Size: 10" x 2.75" x 2.25" high

Tensor Remote switch modes ModeSwitchFunction1APreset 1 (hold to save)BPreset 2 (hold to save)CPreset 3 (hold to save)DPreset 4 (hold to save)2ALeft footswitchBRight footswitchCPreset 1 (hold to save)DPreset 2 (hold to save)3ARecord / OverdubBPlay / StopCPlay OnceDToggle TIME & PITCH (tap) Toggle SPEED (double tap)4AToggle SPEED knobBToggle TIME knobCToggle PITCH knobDToggle RAND knob Loop Sampler (Remote Mode 3)

Mode 3 is designed to use the Tensor as a loop sampler with live loop manipulation. Switches A-C control loop record, overdub, play, and retrigger functions. Switch 4 toggles between the current knob settings and the default (normal playback settings). For example, you can set SPEED to reverse and PITCH to -1 octave for instant access to reverse and half-speed effects.  See the user's manual for complete details.

Configuring the Remote Switch:

1. Start with the pedal powered on and nothing plugged into the CTRL port.

2. Hold the right footswitch while plugging in the remote switch. The right LED will blink yellow 3 times to indicate it is in CTRL configuration mode. You can release the right footswitch and begin configuration immediately.

3. Press one of the buttons on the remote switch to select a mode.

4. Hold the right footswitch for 2 seconds to save the configuration. The right LED will blink green to indicate that the configuration has been saved.