Holly--Beautiful Stratstyle From Estes Electrostring!
Holly is warm, bold, and mellow, all at the same time. Classic features are blended with more modern touches. The pickups are Fender's new Yosemite set, and I couldn't be more pleased with them. Babicz FCH saddles make the tremolo bridge deadly accurate and rock solid.
Her body is solid ash. Before finishing the body, I resin stabilized the bottom portion of the body. There are some cracks, but they'll be staying the way they are forever. Preserving the natural beauty. Then I dyed the whole thing red, and oil finished it. The finish resists water and fingerprints, and shines up with a dry cloth.
The neck is really special. Two piece canary wood, with Jescar medium jumbo frets and abalone dot inlays. Canary is a very dense and oily wood, and doesn't need any finish. It's slick, smooth and hard, and only gets better the more you play.
I left the neck profile a bit thicker than I normally would for a strat type guitar. But the feel of the canary wood begs for a fuller profile. I carved it to a medium "C"--.84" at the first fret, .93" at the 12th. Fairly slim taper. 1.68" wide at the nut, 2.02" at the 12th fret. 25.5" scale length.
As previously mentioned, the pickups are the new Fender Yosemite. These are very quiet for single coils, and the reverse wound middle pickup helps cancel noise further when used with either of the other pickups. These are wound very hot, 7.8K at the neck, 8.5K middle, 8.9K bridge. Fender's unique combination of Alnico 2 and Alnico 4 magnets delivers lots of power with a minimum of mud. Using different combinations of them, tones can range from sparkly to full toned attack.
With such versatile pickups, I decided to use individual switches for each pickup. Flip 'em down to turn 'em on. This way, you can use the bridge pickup with the neck pickup, or all three together. The other controls are a master volume and two master tones. The two tone knobs have different filters, and allows you huge flexibility.
The string path begins with an Estes Electrostring Frankenbridge. The bridge plate is Fender Vintage, which is married to a solid steel block for huge sustain. The saddles are Babicz FCH. These stay in full contact with the plate at all times, for easy adjustments and mind bending sonic transfer.
The nut is cattle bone, and adds to the overall warmth. Also mutes the strings very well. In concert with the low profile Sperzel locking tuners, no string retainers are needed.
All told, Holly is a versatile guitar that anybody could love. At 8lbs 2oz, there's enough to love without being too much.
Buy Holly today! You know you really should...
Her body is solid ash. Before finishing the body, I resin stabilized the bottom portion of the body. There are some cracks, but they'll be staying the way they are forever. Preserving the natural beauty. Then I dyed the whole thing red, and oil finished it. The finish resists water and fingerprints, and shines up with a dry cloth.
The neck is really special. Two piece canary wood, with Jescar medium jumbo frets and abalone dot inlays. Canary is a very dense and oily wood, and doesn't need any finish. It's slick, smooth and hard, and only gets better the more you play.
I left the neck profile a bit thicker than I normally would for a strat type guitar. But the feel of the canary wood begs for a fuller profile. I carved it to a medium "C"--.84" at the first fret, .93" at the 12th. Fairly slim taper. 1.68" wide at the nut, 2.02" at the 12th fret. 25.5" scale length.
As previously mentioned, the pickups are the new Fender Yosemite. These are very quiet for single coils, and the reverse wound middle pickup helps cancel noise further when used with either of the other pickups. These are wound very hot, 7.8K at the neck, 8.5K middle, 8.9K bridge. Fender's unique combination of Alnico 2 and Alnico 4 magnets delivers lots of power with a minimum of mud. Using different combinations of them, tones can range from sparkly to full toned attack.
With such versatile pickups, I decided to use individual switches for each pickup. Flip 'em down to turn 'em on. This way, you can use the bridge pickup with the neck pickup, or all three together. The other controls are a master volume and two master tones. The two tone knobs have different filters, and allows you huge flexibility.
The string path begins with an Estes Electrostring Frankenbridge. The bridge plate is Fender Vintage, which is married to a solid steel block for huge sustain. The saddles are Babicz FCH. These stay in full contact with the plate at all times, for easy adjustments and mind bending sonic transfer.
The nut is cattle bone, and adds to the overall warmth. Also mutes the strings very well. In concert with the low profile Sperzel locking tuners, no string retainers are needed.
All told, Holly is a versatile guitar that anybody could love. At 8lbs 2oz, there's enough to love without being too much.
Buy Holly today! You know you really should...
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
| Body Type |
|
Product safety information may be available here.

