lot of 20 fretboard protecter fret polishing set up tool

 Lesko Multi-Rule Lot

I am in the process of retiring from selling on reverb. And would like to sell these rather than scraping them. so, I am offering them in a lot. So, if you have a reverb store or a brick and mortar I am selling these lower than cost. Shipping is what it is and it is a heavy box. Some are packaged and ready to go, some need packaging.

What is left:

scale 24.625 (5 units)

Scale 24.563 5 (units one need packaging)

Scale 25" (10 units 2 need to be polished). Note these are the older one with no inlay jig. (pictured)

So that is 20 pieces in total

They sell on and off in Dec. I had about 20 go out, the rest of the year is sporadic.

Not fast off the self-sales but steady it might take a year to sell all of them.

This Tool Makes set ups a breeze Check fret height and neck relief with the flip of the ruler.

Need to do a good polish this ruler has fret cut outs to expose the frets and protect the fret board, Much easier than taping off the whole finger board, or having to move a single fret protector each time.

Had a re-fret done this will double check for you, Also a handy tool to check fret distance on used and vintage instruments.

The fret slots for protecting the fret board have a cutout of 2.99mm (it is pictured on a guitar with Fender Jumbo frets), please note there will be more of a gap if used on guitars with narrow frets.

It is also a template for fret distance the fret board protector sits flush against the nut. This comes in handy for new builds everything is measured for you (very small notches inside the fret slots for fret distance.

The straight edge and notched straight edge have a thickness of 0.91 (it is the best thickness to add rigidity but still be able to do a great fret polish.

Cut outs for inlay marking have also been added. The dots are 4.63mm, to be used as a guide.

Available in 5 scale lengths:

25.5” (Fender stratocaster, ect.)

25” (Prs, Ect.).

24.75”(Gibson, Ect. READ BELOW)

24.625

24.563

Gibson has used 24 3/25, 24 9/16, and 24 5/8 over the years please measure you scale to ensure you get the right fit. In stock is the 24 3/4 the other will be ready approx. March 1st 2019.

24 3/4 (24.75) 1st to 2nd fret =1.311"

24 9/16 (24.563) 1st to 2nd fret =1.301"

24 5/8 ( 24.625) 1st to 2nd fret =1.305"

What customers are saying:

Your product is going to save me a ton of time, tape, and danger to my fret boards! It's a very cool idea.

Thanks!

Cheers,
Todd

Great tool. I had a customer swear the neck was warped on a vintage Silverstone. I used this tool to check it. And while not perfect, it was close enough that the customer who did not like it after putting on new strings. Was wrong. It proved the person did not know what he was saying, and that Vintage guitars should not be changed/adjusted by amateurs.

Really really cool product. Well made.