What is Class-D Technology?

Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means our amps don't need massive heat sinks, and that means we can make them lighter. Our no-compromise design means the new PMP mixers will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles.

Massive Mono or Stunning Stereo

Behringer's latest PMP's give you the choice of 2 x 800-Watt stereo, 2 x 800-Watt dual mono mode (giving you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or 1,600-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, PMP mixers can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.

Classic Control, State-of-the-Art Sound

Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Built-in, boutique-caliber mic preamps with switchable +48 V phantom power make it possible to use either dynamic or condenser mics with the PMP Series.

Built-in Digital Effects Processor

The new generation of PMP mixers come equipped with 24-bit FX processors, giving you 100 mind-blowing digital effect presets such as delay, chorus and reverb. Apply them to any channel, as well as to the monitors and main output. In case you're pulling double duty as sound engineer and performer, the FX processors features a footswitch jack for remote on/off . Of course, if you have treasured outboard gear you've grown attached to, these mixers can integrate them into the mix while leaving out the built-in FX processor.

Changing the Channels

The PMP Series gives you excellent flexibility to accommodate whatever a performance requires. You get 8 channels for mics, guitars and other mono instruments. Stereo channels 9-16 (PMP4000) are designed to work in pairs as stereo channels, or independently for more mono instruments. All mono channels have 3-band EQ, switchable Low cut filter for eliminating infrasonics, and Clip LEDs to indicate when the input signal is too hot.

The Ins and Outs

Use the CD/TAPE IN RCA inputs to feed in external stereo signals from CD players or tape decks. The VOICE CANCELLER switch eliminates the vocals from pre-recorded music for instant karaoke applications.

CD/TAPE OUT RCA outputs send line-level signals from the mixer to a recording device. The left and right output ¼" connectors can be used for a variety of purposes, including connecting more power amps. Connect monitor power amps or active monitor speakers to the MON SOUND output. Powered outputs on these mixers are available in professional SpeakON-compatible format.

Features

• Ultra-compact 2 x 800-Watt stereo powered mixer (1600-Watt bridged mode)
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• Ultra-compact design at nearly half the weight of conventional powered mixers
• 16-channel mixer section features 8 mono and 4 stereo channels plus separate CD/Tape input/output
• Studio-grade 24-bit stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
• 8 high-quality XENYX Mic Preamps with switchable +48 V phantom power for condenser microphones
• Effective, extremely musical 3-band EQ, switchable Low cut filter, and Clip LEDs on all mono channels
• Stereo 7-band graphic EQ allows precise frequency correction of monitor or main outputs
• Voice Canceller function removes singer's voice from recordings for karaoke applications
• Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
• Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
• Adjustable stereo CD/Tape input for connecting external signal sources
• Multi-functional stereo Preamp outputs for added flexibility
• Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption

• High-quality components and exceptionally rugged construction ensure long life

Specifications

• Dimensions: 48'' x 18.1'' x 18.7'' / 122mm x 460mm x 476mm (H x W x D)
• Weight: 22.9lbs / 10.4kg

Microphone Inputs

• Connector: XLR, Electronically Balanced Input Circuit
• Frequency Response:
  • <10Hz - 200kHz, -1dB
  • <Hz - >200kHz, -3dB
• Gain: +10dB to +60dB
• Maximum Input Level: +12dBu @ +10dB Gain
• Impedance:
  • Balanced: 2.6k Ohms Balanced
  • Unbalanced: 1.3k Ohms
• Signal-to-Noise Ratio: 109dB / 112dB A-Weighted (0dBu In @ +10dB Gain)
• Noise: 0.002 Percent / 0.0018 Percent A-Weighted (THD+N)

Mono Line Inputs

• Connector: 1/4'' TS, Balanced
• Impedance: 20k Ohms
• Maximum Input Level: +21dBu

Stereo Line Inputs

• Connector: 1/4'' TRS, Unbalanced
• Impedance: >3.6k Ohms
• Maximum Input Level: +22dBu

Equalizer

• Low: 80Hz / ±15dB
• Mid: 2.5kHz / ±15dB
• High: 12kHz / ±15dB

2 Track Input

• Connector: RCA
• Impedance: 3.6k Ohms

Preamp Outputs

• Connector: 1/4'' TRS, Unbalanced
• Impedance: 150 Ohms, Unbalanced
• Maximum Output Level: +21dBu

Monitor Outputs

• Connector: 1/4'' TRS, Unbalanced
• Impedance: 150 Ohms, Unbalanced
• Maximum Output Level: +21dBu

Stereo Outputs

• Connector:
  • 1/4'' TRS, Unbalanced
  • RCA
• Impedance:
  • 1/4'' TRS: 150 Ohms, Unbalanced
  • RCA: 1k Ohms
• Maximum Input Level: +21dBu

Loudspeaker Outputs

• Connector: Professional Locking Connector
• Load Impedance:
  • Main L/R: 4 Ohms - 8 Ohms
  • Monitor/Main Mono: 4 Ohms - 8 Ohms
  • Main Mono/Main Mono: 4 Ohms - 8 Ohms
  • Bridge: 8 Ohms - 16 Ohms

Power Output

• RMS @ 1 THD, Both Channels Driven:
  • 8 Ohms per Channel: 300W
  • 4 Ohms per Channel: 600W
• RMS @ 1 THD, Bridged Mode: 8 Ohms, 1200W
• Peak Power, Both Channels Driven:
  • 8 Ohms per Channel: 400W
  • 4 Ohms per Channel: 800W
• Peak Power, Bridged Mode: 8 Ohms, 1600W

DSP

• Converter: 24-Bit Delta-Sigma, 64/128-Times Oversampling
• Dynamics D/A: 90dB
• Sampling Rate: 46.875kHz
• Delay Time: Maximum 5 Seconds
• Signal Run Time: Approx. 1.5ms (Line In > Line Out)

Display

• Type: 2-Digit, 7 Segment LED