Erica Synths Fusion dual Mixer is designed to mix and overdrive audio signals on the vacuum tube. Features 6 audio inputs Two independent 3-input mixer Sum of all 6-inputs Soft tube overdrive Use the Fusion Mixer as two independent 3-input mixers (also for stereo signal mixing) or a 6-input mixer. Special feature of the Fusion Mixer – great tube overdrive effects when level knobs are set to 3 o’clock or above. When used with drum machines, it even emulates sidechain compressors. When used to mix signals from VCOs Fusion Mixer it works as waveshaper, especially, if pulse width modulated pulse signals is used in one of inputs. All Fusion modules by default are configured to work with regular eurorack PSU. Due to the fact that cold tube heaters have lower resistance, Fusion modules have significant power consumption peak at startup, when power consumption almost doubles for 1-2 seconds. This is not a problem with linear PSUs that have power inertia, but may cause switching PSU internal protection to turn off power supply. Please make sure your PSU has some headroom before installing multiple Fusion modules. If you need a 6 to 6 pin power cable included to your order (suitable for 6VAC PSU), please write that in the comment section during checkout process. Technical specifications: Input signal level up to 20V ptp Output signal level 10V ptp Mixer GAIN 1 Power supply bipolar +-12V , eurorack standard Power consumption Eurorack PSU configuration: 160mA@+12V, 10mA@-12V Module width <p style="outline: #f75a21; margin-right: 0px; margin-bottom: 10px; ma