The SLX14/85 Lavalier Wireless System is part of the SLX wireless systems family. SLX® Wireless Systems are powerful wireless tools that can be set up quickly and used confidently by installers and working bands. Features include auto frequency scan with transmitter setup, exceptional wireless clarity, and Shure patented Audio Reference Companding. Includes WL185 lavalier microphone, SLX1 bodypack transmitter, SLX4 receiver, tie clip, rackmount kit, two 1/4 wave antennas, power supply, 2 AA batteries, protective bumpers with 8 screws, vinyl bag, and user guide. Recommended for general purpose sound-reinforcement applications requiring good rejection of ambient noise, the WL185 is a cardioid lavalier microphone with a 130° pickup angle. It has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. Included tie clip can be rotated in 90° intervals for placement flexibility. Use of windscreen highly recommended.
Includes- WL185 lavalier microphone
- SLX1 bodypack transmitter
- SLX4 receiver
- tie clip
- rackmount kit
- two 1/4 wave antennas
- power supply
- 2 AA batteries
- protective bumpers with 8 screws
- vinyl bag
- and user guide
- Includes SLX1 bodypack transmitter, SLX4 diversity receiver, WL185 lavalier condenser mic
- 12 compatible systems per band
- 24MHz tuning bandwidth
- Exceptional clarity for working bands & professionals
- Quick and easy setup
- SLX1
- Wireless Bodypack Transmitter. Designed for adverse conditions. Eight hours battery life, 300 ft. range.
- Audio Input Level:
- -10 dBV maximum at mic gain position
- +10 dBV maximum at 0 dB gain position
- +20 dBV maximum at -10 dB gain position
- Gain Adjustment Range: 30dB
- Input Impedance: 1 MO
- RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
- Dimensions (HxWxD): 108 mm x 64 mm x 19 mm (4.25" x 2.50" x 0.75")
- SLX4
- Single-channel Diversity Receiver with optional logic output. Up to 42 compatible systems (multi-band).
- Dimensions (HxWxD): 42 mm x 197 mm x 134 mm (1.65" x7.76" x 5.28")
- Weight: 816 g (1 lb. 13 oz.)
- Housing: Galvanized steel
- Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone):
- XLRconnector (into 600 Ohm load): –13 dBV
- 1/4" connector (into 3000 Ohm load):–2 dBV
- Output Impedance:
- XLR connector: 200 Ohms
- 1/4" connector: 1kOhms
- XLR output:
- Impedance balanced
- Pin 1: Ground
- Pin 2: Audio
- Pin3: No signal
- Sensitivity: –105 dBm for 12 dB SINAD, typical
- Image Rejection: >70 dB, typical
- Power Requirements: 12–18 Vdc at 150 mA, supplied by external power supply
Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
Brand | |
Model |
|
Categories | |
Microphone Type |
|
Electronics |
|
Polar Pattern |
|
Wired/Wireless |
|