Big sound. Full sound. Sophisticated sound. Is your mic living up to the power of your vocal? For decades, the BETA 58A has been through the wringer, pushing voice to the forefront on the biggest stages in the world. For sound that commands the attention of the entire crowd, this is your microphone. The Shure BETA 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide. The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.

Amazon.com

Designed for professional sound reinforcement and project studio recording Shure Beta 58A high-output supercardioid dynamic vocal microphone is a great choice for vocalists and touring professionals. Maintaining a true supercardioid pattern throughout its frequency range, the Beta 58A insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. It has a shaped frequency response that is ideal for close-up vocals. And its rugged construction, proven shock mount system, and hardened steel mesh grille make it great for use on the stage.

The Shure Beta 58A vocal microphone. Frequency response. Polar pattern.

Key Features

Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect

Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound

Neodymium magnet for high signal-to-noise output

Hardened steel mesh grille that resists wear and abuse

Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration

Minimally effected by varying load impedance SpecificationsPolar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency. Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. Case: Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille. Adjustable, Stand Adapter: Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish. Weight: 9.92 ounces

Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.

Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL

Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.

Case: Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille.

Adjustable, Stand Adapter: Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish.

Weight: 9.92 ounces


Specifications

Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.

Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL

Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.

Case: Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille.

Adjustable, Stand Adapter: Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish.

Weight: 9.92 ounces