Shipping continental USA only. Sales tax in California.
Audio-Technica’s AT4060 cardioid vacuum tube condenser
brings the warmth of vintage tube sound to every shade of the SPL spectrum.
With a dynamic range that far exceeds that of other tube microphones, it as
easily captures the subtlest nuances of vocal and instrumental performance as it
handles guitar cabinets and other extreme SPL environments. Featuring
hand-selected, individually tested and aged tubes, the AT4060 achieves the
coveted, classic sound of valve design without compromising the specification
standards required for the most demanding recording situations.
Audio-Technica
takes no chances with this microphone’s consistency and reliability: every
AT4060 is individually tested and inspected for 100 percent quality
assurance—rare in today’s world of mass-marketed studio microphones.
AT4060.
Vintage sound, rock-solid reliability and amazing versatility for studio and
live performance. From Audio-Technica’s premium line of 40 Series condenser
microphones.
- Vintage tube sound with the
versatile performance necessary for the most demanding studio applications
- Wide dynamic range, low
self-noise and high max SPL capability
- The 2-micron-thick,
vapor-deposited gold diaphragms undergo a five-step aging process so that
the optimum characteristics achieved remain constant over years of use
- Dual-diaphragm capsule design
maintains precise polar pattern definition across the full frequency range
of the microphone
- Precision-machined,
nickel-plated brass, acoustic element baffle provides enhanced element
stability and optimal sensitivity
- Regulated and heavily filtered
heater current prevents noise contamination of audio signal chain
- Hand-selected tubes are
individually tested and aged to maintain peak performance
- Large coupling transformer
provides superior low-frequency linearity
- Custom shock mount provides
superior isolation
ELEMENT
Externally polarized
(DC bias) condenser
POLAR PATTERN
Cardioid
FREQUENCY RESPONSE
20-20,000 Hz
OPEN CIRCUIT
SENSITIVITY
-34 dB (19.9 mV) re
1V at 1 Pa
IMPEDANCE
200 ohms
MAXIMUM INPUT SOUND
LEVEL
150 dB SPL, 1 kHz at
1% T.H.D.;
149 dB SPL, 1 kHz at 0.5% T.H.D.
NOISE
19 dB SPL
DYNAMIC RANGE
(typical)
131 dB, 1 kHz at Max
SPL
SIGNAL-TO-NOISE
RATIO
75 dB, 1 kHz at 1 Pa
POWER REQUIREMENTS
AT8560 power supply
(120V/230V AC)
WEIGHT (MICROPHONE)
22.6 oz (640 g)
WEIGHT (POWER
SUPPLY)
4.19 lbs (1.9 kg)
DIMENSIONS
MICROPHONE:
8.27" (210.0 mm) long,
2.10" (53.4 mm) maximum body diameter
POWER SUPPLY: 8.27" (210.0 mm) W x
8.86" (225.0 mm) D x 1.73" (44.0 mm) H
OUTPUT CONNECTOR
XLRM-type (on power supply)
CABLES
32.8' (10 m) cable
with 6 pin XLR-type connectors for use between microphone and power supply;
AC power supply cable
ACCESSORIES
FURNISHED
AT8560 power supply;
AT8447 shock mount for 5/8"-27 threaded stands; rack-mount adapters for
power supply; protective mic carrying case