Yamaha FG-TA TransAcoustic Dreadnought Acoustic Guitar, Vintage Tint

Yamaha Transacoustic Guitar

Playing the guitar in a rich, live room is one of the most awe-inspiring and engaging experiences imaginable. The Yamaha TransAcoustic guitar embodies this same incredible sound without any external amplification or effects.

The Yamaha TransAcoustic guitar recreates an incredible experience without needing any external amplification or effects, just the guitar itself. With built-in reverb and chorus at your fingertips, it's the most inspiring, engaging acoustic guitar you'll ever play.

Simple Controls

Three simple knobs let you adjust your amount of effects and the line out volume level. By keeping the controls small, it minimizes the area of the holes in the body material, reducing acoustic sound loss.

(A) Chorus Control

(B) Reverb Control (Room / Hall)

(C) TA Switch / Line Out Volume Control

Note:

- Pressing the TA Switch for more than 0.3 seconds activates the TA function.

- When a cable is connected to the line out jack, the line out volume can be adjusted by rotating the (C) knob.

- The reverb type switches from Room to Hall around the 12:00 position.

How it Works

An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar, and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.

Scalloped Bracing

The body is a solid spruce top with mahogany back and sides guitar based on the FG-series.

Louder and stronger sound in the low- to mid-ranges, thanks to cutting-edge acoustic analysis technology developed by the Yamaha R&D Division and a latest-designed scalloped bracing pattern.

Latest-Designed Battery Box

The battery box is integrated into the end-pin jack. This requires fewer holes in the body and reduces acoustic sound loss. It can also be connected to a PA or amp for use as an acoustic electric guitar.

• Amazing sounding reverb and chorus built into the Guitar with no need for external amplification or effects
• An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings
• Three simple knobs let you adjust your amount of effects and the line out volume level
• The Guitar Body is based on Yamaha FG820, with a solid Spruce top with Mahogany back and sides
• SYSTEM70 Trans Acoustic Preamp with a SRT Piezo Pickup