The Purple Audio Pants 500-Series Preamp is a four opamp, diferential microphone preamp designed to work in standard 500-Series racks.
The
Pants uses a unique dual-bobbin input transformer from Cinemag unlike
any other. The smooth Gain control helps you dial in the sound you want.
If the output level is too high, you can ride the level down with the
separate Level control. Pressing the "High" switch changes the feedback
network to provide an insane 78dB of clean gain, a great match for very
low output mics. With different Gain, High mode switch, and Level
settings the Pants can produce many different tones with the same amount
of output level. The front panel DI goes through a FET buffer into the
input transformer, adding an extra dimension to the sound of the preamp.
The DI load switch gives you two options, making it even easier to get
the best direct tone for your instrument. Two LEDs clearly indicate
signal level for the gain and output stages at a glance, turning green
to indicate signal present, yellow for 10dB below clipping, and red for
clipping. The Pants uses two KDJ3 opamps and two KDJ4 Purple Audio Pants 500-Series Preamp Features
- Output level control
- Input and output tricolor LED metering
- Mic / Line switch for rack input Bridging line input for high output mics or line level sources Use with the Moyin module in the Sweet Ten rack for mic or line mixing
- DI Load switch for front panel input 100kohms or 1M ohms for a more open tone
- Discrete signal path
- Over Current Resettable Fused (prevents any module problem from affecting your rack)
- ROHS - Lead Free
