OVERVIEW:
Jack Rabbit is a high quality analog
pedal, that delivers a wide variety of tremolo effects - from warm
wobble to whacked out. It features simple control over tempo by
incorporating both tap, and strum tempo modes. It's modulation rate
spans from 1Hz to 20Hz and utilizes a tempo subdivision switch. The Jack
Rabbit Tremolo is housed in a sturdy, aluminum enclosure for maximum
protection from abuse. It can be remote controlled via the FxLink jack.
Like all Suhr pedals, the Jack Rabbit Tremolo is True Bypass and can
be powered from 9-18Vdc, drawing low current for extended battery life.
It is protected from both over voltage and reverse voltage.
TEMPO SUBDIVISION SWITCH:
Jack Rabbit features quarter note, eighth note, and quarter note triplet subdivisions.
TONE SHAPPING TOOLS:
Rate: Controls the speed of the tremolo effect, from 1Hz to 20Hz.
Level: Controls the output level of the pedal, from +0dB to +14dB.
Depth: Controls the depth of the tremolo effect.
Waveform: Selects the modulation waveform which includes Sine, Square, Triangle, Reverse Ramp, and Ramp.
Battery Monitor:
The internal 9V battery is
monitored at both power up and during use. The user will be alerted when
the battery voltage becomes low. When the battery becomes too low to
reliably operate the pedal, True Bypass is activated.
SPECIFICATIONS:
Input Impedance: 1M ohm
Output Impedance: 600 ohm
Power Connector: 9Vdc, center negative, 2.1mm x 5.5mm
Operating Voltage: 5V to 18V (nominal 9V)
Maximum Voltage: 20Vdc
Reverse Battery Protection: yes
Over Voltage Protection: yes
Current Consumption: < 20mA
Estimated Battery Life: 25 – 50 hours continuous use
Dimensions: 2.50" Width x 4.50" Depth x 1.25" Height
Weight: 0.75 pound
FxLink Connector: 1/8" stereo
FxLink max Voltage: 3.3Vdc
Shield -> Tip: Activate on/off
Shield -> Ring: External Tap
ROHS Compliant: Yes
Agency Approvals: N/A