Please note: Saturnworks parallel loopers are custom built-to-order and take around 2-3 weeks to build. 

You've heard of parallel universes. How about layering parallel sounds? Add multi-layered dimensionality to your setup with a Saturnworks 4-parallel looper. 

The Saturnworks 4-parallel looper seamlessly blends the sounds of up to four parallel signal paths plus a fifth dry channel. Most multi-loopers (and pedalboards in general) are arranged serially, meaning that the signal from the upstream loop feeds into the downstream loop - the problem being that the sound of the downstream pedal will always be affected by the upstream pedal, so you can't get the pure sound of both.

A parallel setup lets you combine multiple sounds without one affecting the other. The parallel looper splits the signal five ways, sends the four channels through the FX loops, and back through level controls and on/off switches. The fifth 'dry ' channel goes through a volume control and straight to the mixer. An active mixer combines all five signals into a single output. The parallel looper can blend the sounds of two fuzz pedals, an overdrive with a fuzz, a clean tone and a distortion, a delay with an overdrive, or whatever combo you can dream up. 

The Saturnworks 4 parallel looper uses active circuitry to avoid tone loss throughout the splitting and mixing process. It uses a 5-way buffered splitter, which has a separate buffer for each signal path. It also uses an active mixer circuit to avoid tone loss and eliminate crosstalk. Each channel's level may be cut, set to unity, or boosted relative to the others using a built-in clean boost. 

A true bypass master switch enables you to bypass the parallel circuitry altogether and send your signal straight to the output. 

The Saturnworks 4 parallel looper uses the top-quality components and features including:

• High quality footswitches.
• Heavy duty Neutrik 1/4" TS jacks
• A solid 2.75" x 10" x 2" (1032L size) cast aluminum enclosure.
• Runs on standard (for pedals) 9v DC center-negative power. 
• A top quality Lumberg brand power jack. 
• High grade buffer circuits prevent signal loss. The buffers have an input impedance of 1M and output impedance of <100 ohms. 
• An active mixer circuit to prevent crosstalk between channels. 
• High quality wire made in the USA. 
• Handcrafted and bench-tested in California, USA
• A one-year limited warranty against parts and manufacturing defects. See saturnworkspedals.com/faq for warranty terms and conditions.

Please note: The pedal in the demo video is not the specific pedal in this listing. It is to demonstrate the parallel loop concept. The pedal in the video has three parallel loops plus a master bypass. The pedal in this listing has four parallel loops plus a master bypass.

Check out saturnworkspedals.com for the full Saturnworks lineup.