Kent Armstrong Loaded Black Pearl Strat Pickguard Humbucker & P90 with Dial A Tap.

Kent Armstrong Loaded Black Pearl Strat Pickguard Humbucker & P90 with Dial A Tap.
Loaded Strat pickguard up with a Kent Armstrong Super Rocker High Output humbucker in the bridge and a Kent Armstrong S-90 P-90 neck pickup, or code for just bad ass sound!! Bridge pickup just a killer pickup for hi gain but also does cleans very well. Instead of a coil split switch, I out in a Dial A Tap so you can control how much of a split you want to put in or out. Also included in my wiring is a Treble bleed kit. Very simple down and dirty wiring but the way I set it up you have a huge range of tonal options.
I will throw in some foam and springs, you will need to mount iut to the inside of the pickup pocket and you WILL have to remove a little pickup pocket wood to get the P-90 to fit. If you have not done that before or body mounted a pickup, you should take it to a qualified guitar tech or luthier to have them mount it and for proper set up. Once the pickguard has left me shop I can not control the mounting or fitting of the pickup. 500 Full sized Cor Tek D pots, sealed 3 way deluxe switch and 0.047 Audio grade capacitor. Input wires, Red Positive and Green Negative are pre tinned as well as the Blue pigtail for your trem claw or bridge ground.
Bridge Pup: Super Rocker (HRO-1 / WPU11) CERAMIC / D.C. =15K- A rich, high output Humbucker, more powerful than the 6 Shooter PAF but less than our Grinder pickup. Great for Rock and other medium gain tones. Comes with 4 core cable so that it can easily be coil tapped for single coil tones if required, but Dial A Tap was installed instead of switch.
Neck pup: S-90 ALNICO / D.C. =7.8K- The classic P-90 pick-up - all the tones are there - fat, bluesy, rich single coil tone. A great balance of EQ covering the entire sonic spectrum has helped to garnish this pick-up rave reviews from all who have dares to use it. A versatile pick-up that sounds great with clean or distortion sounds.
Please check out my other loaded pickguards I have listed and if you dont see something that fits your needs feel free to get a hold of me and I can make you any configuration of pickguard you need or wire harness or loaded control plate, you name it I can make it.