The Triple Crown series is built for players who refuse to compromise. Three channels take you from pristine clean to high-gain saturation heavy enough to satisfy even the most devoted gain hound.

MIDI programmability, Multi-Soak power control, and a built-in CabClone make it equally at home on stage, in the studio, or in the bedroom.

Three Independent Channels

Every channel has its own Gain, Treble, Mid, Bass, Presence, and Master controls, plus Multi-Soak power control and rear-panel Reverb.

• Channel 1 (Clean): Normal or Drive modes
• Channel 2 (Low Gain): Normal or Tight modes
• Channel 3 (High Gain): Normal or Tight modes

Award-Winning Features

• MIDI control
• Reverb
• Buffered series FX loop
• CabClone DI output with three cabinet voicings

Multi-Soak Power Control

Nothing has the grunt and kick of a 100-watt head, but all that power is only useful if you can control it. The Triple Crown delivers punch and aggression on demand, then tames it with the flick of a switch for home or studio use.

Every channel has its own Multi-Soak attenuator with five power settings:

• 100 watts: full power and headroom
• 50 watts
• 20 watts
• 7 watts
• 3 watts: low-power clip-ability

That multiplies the versatility of each channel many times over.

Switchable Power Tubes

Want one amp that does it all? The Triple Crown runs EL34, 6L6, or 6V6 power tubes, giving you plenty of room to sculpt your tone and feel with the flick of a switch.

Note: loading 6V6 tubes cuts the amp’s wattage in half.

Preamp Tubes: 6x12AX7 & 1x 12AT7

Power Tube Type: 4x EL34 (or 6V6 or 6L6)

Bias Switch for Alternate Power Tubes: Bias Select for EL-34/6V6 or 6L6

Wattage: 3, 7, 20, 50 or 100 Watts via Mesa's Proprietary Multi-Soak™ Channel Assignable Power Attenuator - See Power Amp Details for more information

Built-In Power Amp Attenuation: Built-in Mesa Multi-Soak™ Channel Assignable Power Attenuator - See Power Amp Details for more information

Power Amp Details: Class A/B Power with Mesa's proprietary Multi-Soak™ Channel Assignable Power Attenuator that provides each channel with an independent 5-position power switch with power choices of 3, 7, 20, 50 or 100 Watts per channel

Cooling: Fan Cooled 

Channels & Modes: 3 Channels (6 Modes)

Channel Control: Each Channel features Independent 2-Position Style Mode Switch, Gain, Treble, Mid, Bass, Presence, Reverb (back panel), and Master Controls

Mode Voicings/Styles:  Ch. 1 = Normal (Clean) or Drive
                                          Ch. 2 = Normal (Crunch) or Tight
                                          Ch. 3 = Normal (High-Gain) or Tight

Reverb: Yes (Tube Driven Spring)

FX Loop: Fully Buffered Series 

Footswitch Functions: Channels, Solo, FX Loop, Reverb

Global Output Level: Yes

Global Solo Level Control: Yes (Over all channels)

External Switching Jack Options/Midi: MIDI Switchable/Programmable via Control Change and Program Change messages, with 256 Preset Location (MIDI IN, MIDI Thru/Out, MIDI Channel & Store Switches) – Controls Channels 1, 2, 3, Reverb, FX Loop & Solo

Speaker Outputs: 8 Ohm / 4 Ohm Switch with Two Speaker Jacks 

Cabinet Simulation/ D.I. Live/Recording Output: Built-in MESA CabClone™ Cab Simulator Output featuring Closed Back, Open Back & Vintage Cabinet Simulations, Internal Amp Load, Headphone Output & Uncompensated Line (Slave) Output, Speaker On/Off & Ground/Lift Switches

Headphone Output: Yes

Slave Output: Yes (Uncompensated Line Output works as Slave Out)

Weight: 46 Lbs. 

Dimensions: 9 5/8" x 22 3/4" x 10 3/8"