Furman spb-8c 1990 - black
Unit sold as depicted in pictures
MODEL SPB-8C
specs
9 VDC REGULATED OUTPUTS
STEREO PEDAL BOARD
POWER CONDITIONER
120MA PER OUTPUT
FURMAN
The Furman SPB-8C Stereo Pedal Board and Power Conditioner is an all-in-one professional stage and studio solution designed to supply clean, isolated power and streamlined stereo signal routing for complex effects setups.
The technical specifications and electrical parameters for this unit include:
Power & Electrical Specifications
• DC Outputs: 8 completely isolated, regulated 9 VDC outputs.
• DC Current Rating: 120 mA maximum per output (Note: Some early manual prints listed 100 mA, but the hardware chassis specifies up to 120 mA) with a 1A maximum combined current across all 9VDC outlets.
• DC Short-Circuit Protection: 8 discrete, individually resettable internal safety fuses. If one pedal shorts out, the remaining outlets stay fully operational.
• AC Outlets: 4 widely spaced 120 VAC, 15A outlets controlled by a master power switch, specifically configured to fit large "wall " power adapters without blocking adjacent sockets.
• Transformer Type: Internal toroidal transformer engineered for ultra-low-noise performance to eliminate proximity hum and ground loops.
Power Conditioning & Surge Suppression
• Spike Protection Mode: Line to Neutral.
• Response Time: 1 nanosecond.
• Maximum Surge Current: 6,500 Amps.
• Maximum Spike Energy: 80 Joules.
• Spike Clamping Voltage: Initial turn-on at 200 Volts; TVSS rating of 400 Volts peak at 500 Amps.
• EMI/RFI Noise Attenuation: Transverse Mode greater than 20 dB from 800 kHz to 10 MHz.
Audio Signal Patching
• Stereo Patch Bay: Features 8 insulated, isolated 1/4" switching phone jacks forming dual stereo loops. This acts as a central hub for handling stereo effects returns, processing loops, and routing signals to multiple amplifiers while preventing ground loop hum.
Mechanical & Physical Build
• Chassis Construction: Steel frame base with a high-impact 1/4" polycarbonate pedal platform.
• Pedal Mounting Pad: 13.75" x 26.75" hook-and-loop (Velcro) touch-fastener surface.
• Pedalboard Dimensions: 28.5" W x 20.125" D x 8"H (case)
• Hardshell Transport Case: Heavy-duty polyethylene road case with a completely removable lid, spring-action latches, a retractable luggage-style handle, and inline skate wheels.
• Total Case Weight (With Board): 22 lbs
Protezione di Reverb per gli acquirenti
Reverb ti protegge nel caso in cui il tuo articolo venga perso, danneggiato o non corrisponda alla descrizione. Basta segnalare eventuali problemi entro 7 giorni e ti aiuteremo a ottenere il rimborso completo.Scopri di più sulla Protezione di Reverb per gli acquirenti.
| Pubblicato | 2 ore fa |
|---|---|
| Condizione | Buono (Usato) Gli articoli "Buoni" funzionano correttamente ma possono presentare segni di usura.Scopri di più |
| Marchio | |
| Modello |
|
| Finish |
|
| Categorie | |
| Anno |
|
Le informazioni sulla sicurezza del prodotto sono disponibili qui.

