Open box for inspection/A brand new. Pair of satellite speakers for sale.

Attention! Break-In Period: ENERGY recommends that you break in this speaker system for 50 hours(with moderate volume).

 Technical Specifications

  • Frequency Response - Sat: 115Hz-20KHz; Center: 110Hz-20KHz; 
  • Crossover Point - 2.9 kHz
  • Sensitivity - 89dB
  • Power Handling up to 100 Watts
  • Recommended Amplifier Power - 20 - 100 Watts RMS (continuous)
  • Impedance - 8-ohm compatible.

The satellite speakers feature a 0.75" Hyperbolic Aluminum-Dome tweeter and 3.0" Poly-Titanium Cone woofer with a rubber surround inside a magnetically shielded bass-reflex enclosure with a rear firing port. The speakers are rated at 8-ohm. The satellite speakers have a frequency response of 115 to 20,000 Hz. Each satellite speaker features a high-gloss black finish, a removal cloth grille, gold-plated binding-post terminals (accommodates up to 15 AWG speaker wire), and a rear-mounted key-hole slot for wall-mounting (mounting screws not supplied). There is also a 1/4"-20 threaded insert on the back of the speaker for wall-mounting the satellites using an optional bracket (sold separately). The satellite speakers can also be placed and secured on optional speaker stands or shelves using the supplied self-adhesive rubber feet.Surround Satellite Speakers: The surround speakers can be positioned in a variety of locations. The surround placement is usually dictated by the room, where the walls and room boundaries happen to be, and where speaker cable can be easily run. The most common surround speaker locations are the following:

  • Side Walls: For best results in side wall mounting applications, position the speaker adjacent to and slightly behind the primary listening area at a height of approximately 6 feet.
  • Rear Walls: For best results mounting on a rear wall, position the speakers so they flank the main listening area and point towards the front of the room. They should be raised to a height of approximately 6 feet and should ideally have a space of 6 feet between them.
  • Break-In Period: ENERGY recommends that you break in this speaker system for 50 hours(with moderate volume) before playing the speaker at their full capabilities. This can be easily done by putting your compact disc player on Repeat mode, while playing a CD with a wide dynamic range at normal listening levels.

Questo articolo è venduto "Come da descrizione”

Questo articolo è venduto "Come da descrizione" e non può essere restituito a meno che non arrivi in condizioni diverse da come è stato descritto o fotografato. Gli articoli devono essere restituiti nelle condizioni originali in cui sono stati spediti, con tutti gli imballi originali.Scopri di più.

Annunci simili in promozione













Pubblicato11 ore fa
CondizioneEccellente (Usato)
Gli articoli "Eccellenti" sono quasi completamente privi di difetti e altri difetti visivi e sono stati suonati o utilizzati con la massima cura.Scopri di più
Marchio
Modello
  • Take classic
Finish
  • high gloss-black
Categorie
Prodotto in
  • Cina

Le informazioni sulla sicurezza del prodotto sono disponibili qui.

Informazioni sul venditore

H's Shop

Louisville, KY, Stati Uniti
Iscrizione a Reverb::2023

Protezione di Reverb

Resi semplici, transazioni sicure, assistenza di persone in carne e ossa

Scopri di più

Checkout sicuro

Reverb Gives

Con i tuoi acquisti dai un contributo ai programmi musicali rivolti ai giovani, aiutandoli a ricevere gli strumenti di cui hanno bisogno.

Ops, forse hai dimenticato qualcosa. Verifica i campi evidenziati in rosso.