Super compact, powerful bass head. ~5lbs! This was a dealer demo unit and has seen almost no usage. A few extremely minor finish scratches, if that. Includes a heavy gauge power cable.


From Ashdown:
Delivering 500 watts of classic Ashdown sound in a lightweight, portable head, the Rootmaster 500 EVO III combines a flexible EQ, Sub Harmonic Generator, Compression, and Valve Emulated Drive with pro features like an Analogue Cab Sim DI output, balanced D.I., and monitor filters. This makes it a rugged, reliable choice for stage and studio alike.

500 Watts of Authority

Precision Power for Every Stage

The Rootmaster 500 EVO III delivers a formidable 500 watts of output alongside a wide frequency response and responsive 5-band EQ. It gives bassists full control of their sound, ensuring tone that resonates both on stage and in the studio. Powerful yet lightweight, it's designed to meet the demands of modern players without compromise.

Analogue Warmth Meets Digital Progess

Classic Ashdown Tone, Modern Innovation

Though it marks a new chapter in Ashdown's advancements, the Rootmaster 500 EVO III stays true to the brand's signature analogue warmth. Featuring the Ashdown Sub Harmonic Generator for earth-shaking lows, a built-in Compressor for dynamic control, and Valve Emulated Drive for grit and warmth, it delivers the Swiss army knife versatility that Ashdown amps are known for.

Reliable, Rugged, and Ready Anywhere

Designed for the Global Player

Built with the gigging bassist in mind, the RM-500 EVO III accommodates power requirements from 115-230V, making it a true globetrotter. Two Neutrik Speakon/Jack outputs ensure solid, roadworthy connectivity, while its frequency response of 17Hz-30kHz captures the entire bass spectrum with unmatched clarity. High/low instrument inputs and a line input make it flexible for a wide variety of basses and sources.

Front-of-house Ready

Connectivity That Covers It All

The Rootmaster 500 EVO III provides multiple DI options to fit any live or studio situation. A balanced D.I output delivers pristine signal for front-of-house, while a dedicated tuner output simplifier stage setups. One the rear panel, an XLR DI with post-EQ and post-effects routing ensures your sound is always mix ready, no matter the setup.

Shape your tone to perfection

Next-Generation Cab Simulation

Ashdown's Analogue Cab Sim DI takes flexibility to new heights, offering filters that emulate the legendary ABM cabinets. Bassists can tailor their sound with enclosure options (Ported for extended lows, Sealed for tighter punch), speaker voicing (10" for mid-focused precision, 15" for deep clarity), and a Horn option that adds a high-end lift about 5kHz. This level of customisation empowers players to sculpt their ideal sound for any performance.

Features

Power

  • Power Output : 500 Watts
  • Power Requirements : 115–230 Volts
  • Impedance : Minimum 4 Ohms

Connectivity & I/O

  • Speaker Outputs : 2 × Neutrik Speakon/Jack outputs
  • High Instrument Input : Impedance 3.9M Ohms, input range 150mV
  • Low Instrument Input : Impedance 10k Ohms, input range 300mV – 405V p-p
  • Line Input : Impedance 22k Ohms, input level 0dBu nominal
  • DI Output : 420 Ohm balanced, Level 0dBu nominal
  • Effects Send : Impedance 22k Ohm, Level 0dBu nominal
  • Effects Return : Impedance 22k Ohms, Input Level 0dBu nominal

Performance

  • Frequency Response : –3dB @ 17Hz and 30kHz
  • Signal to Noise : Better than 80dB (EQ flat)

EQ

  • Bass : ±15dB @ 100Hz
  • Lo Mid : ±15dB @ 340Hz
  • Middle : ±15dB @ 660Hz
  • Hi Mid : ±15dB @ 1.6kHz
  • Treble : ±15dB @ 7kHz shelving
  • Distortion : Less than 0.5% THD

Dimensions

  • Height : 89 mm
  • Width : 311 mm
  • Depth : 235 mm

Reverb-Käuferschutz

Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.

Inseriertvor 21 Stunden
ZustandHervorragend (Gebraucht)
Hervorragende Artikel sind fast ohne Gebrauchsspuren oder optische Fehler, aber wurden gespielt und vorsichtig benutzt.Weitere Informationen
Marke
Modell
  • RM-500 EVO III Rootmaster 500-Watt Bass Amp Head
Farbe
  • Black
Kategorien
Jahr
  • 2024 - Present
Hergestellt in
  • China, Volksrepublik
Anzahl der Eingänge
  • 1 Eingang
Röhren-Typ
  • Keine
Eingebaute Effekte
  • Keine eingebauten Effekte
Direkter Ausgang
  • Kein Direktausgang
Elektronik
  • Solid State (Transistor)
Effektschleife
  • Effektschleife
Reverb
  • Keine
Farbfamilie
  • Black
Anzahl der Kanäle
  • 1 Kanal 
Impedanz
  • 4 Ohm
Ausgangsleistung (Watt)
  • 500

Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

Über den Verkäufer

Brad Has Some Gear To Sell

Detroit, MI, Vereinigte Staaten von Amerika
Mitglied bei Reverb seit:2017

Reverb-Schutz

Einfache Rücksendungen, sichere Transaktionen, Support von Experten

Weitere Informationen

Sichere Zahlung

Beworbene ähnliche Inserate













Produktrezensionen

Reverb Gives

Mit deinen Käufen unterstützt du Programme zur Förderung Jugendlicher, damit sie das Equipment erhalten, das sie zum Musizieren brauchen.

Ups, sieht aus, als hättest du etwas vergessen. Bitte prüfe die rot hervorgehobenen Felder.