BIGZUN DUO OSC Eurorack Dual Digital Oscillator 8HP Supersaw Sync Through-Zero FM OLED VCO
BIGZUN DUO OSC – 8HP Eurorack dual digital oscillator
Two oscillators, one clear screen, endless sequences
DUO OSC is a digital dual oscillator for Eurorack in 8HP. Each oscillator has its own 1 V/oct input, linear through-zero FM, seven waveforms that morph smoothly into each other and its own output. A third output mixes both. The OLED shows the note, the tuning in cents and the live waveform of each oscillator, so you always know what you are hearing – no tuner needed.
Plug one sequencer cable into V/OCT A and both oscillators play: oscillator B follows A at the interval you choose – unison, fifth, octave, sub-octave. Plug a second cable into V/OCT B and you have two independent voices.
What it does
- Two full oscillators – A and B, each with TUNE, WAVE and FM knobs, a V/OCT input, an FM input and its own output.
- 7 morphing waveforms – sine, triangle, saw, square, narrow pulse, SUPERSAW (seven saws detuned up to ±10 cents) and TUNED NOISE whose colour follows the pitch. Between shapes the sound changes smoothly; between square and pulse the knob works as a manual pulse width.
- Easy, exact tuning – TUNE moves in whole semitones (±12), octave (−3…+3) and fine tuning (±100 cents) are set with the SYNC button held. Everything is shown on the screen and remembered after power-off.
- B follows A – with V/OCT B empty, oscillator B follows A and TUNE B sets the interval in semitones. One cable, two voices: thick unisons, fifths, octaves and sub-octaves.
- Hard sync – one press syncs B to A for sharp, vocal sync sweeps (status LED on the panel).
- Through-zero linear FM – a depth knob per oscillator; patch OUT A into FM B for bells, metallic tones and growls with one cable.
- Three outputs – OUT A, OUT B and MIX (A + B, never clips).
- Clean sound – anti-aliased saw, square, pulse and supersaw at a 48 kHz sample rate, clean even on high notes.
- Calibration menu – two-point 1 V/oct calibration for accurate tracking across octaves.
The display
The 0.96" OLED is split in two: oscillator A on top, B below. For each you see the note name, the deviation in cents with a small tuning bar, the current waveform drawn live with a moving dot, its name, and an FM bar showing the depth and the voltage arriving at the FM input. Tags show the interval of B (+7, −12, B=A), SYNC, and the octave while you tune.
Berlin School ready
Patch a sequencer into V/OCT A, set A to saw and B to supersaw an octave below or a fifth above, send MIX to an envelope-controlled VCA and a delay – and you have the classic, hypnotic sequencer sound. DUO OSC works great with BIGZUN Timewind Pulse and Stochastic Scale sequencers, CONTOUR envelopes and VCA2.
Controls
- Knobs: TUNE A, WAVE A, FM A, TUNE B, WAVE B, FM B
- Button: SYNC (short press: sync on/off; hold: octave and fine tuning), SYNC LED
- Inputs: V/OCT A, FM A, V/OCT B (normalled to V/OCT A), FM B
- Outputs: OUT A, MIX, OUT B
Specifications
- Format: Eurorack 3U, 8 HP
- Power: +12 V approx. 85 mA, −12 V approx. 11 mA, no +5 V needed; standard 10-pin header, reverse-polarity protected
- V/OCT inputs: 1 V/octave, linear range approx. −0.8 to +9 V (10 octaves)
- FM inputs: linear through-zero FM, ±5 V
- Outputs: OUT A / OUT B approx. ±4.6 V (9 V peak-to-peak), MIX up to approx. ±4.5 V, 1 kΩ, short-circuit safe
- Pitch range: C0 to C8 with the knobs, up to 12 kHz with V/OCT
- Sample rate: 48 kHz
- Display: 0.96" OLED, 128×64
- Memory: octave, fine tuning and calibration kept after power-off
- Firmware: updatable via USB-C
Perfect for
Berlin School and ambient sequences, fat basses and leads, detuned pads, FM bells and metallic percussion, noise-based drums – and anyone who wants two great oscillators in a small space with a screen that shows exactly what they play.
Documentation
A full user manual in English and Polish (PDF) is available – just send a message.
Good to know
- Fully assembled and tested – ready to use.
- Requires a Eurorack case and power supply (not included).
- Designed and built in Poland by BIGZUN.
- Questions about the module or a custom request? Message me – I'm happy to help.
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand |
|
| Model |
|
| Categories | |
| Year |
|
| Made In |
|
Product safety information may be available here.








