ELECTRO/VOICE  X-Array install Model Xi-1122/85 RMD™ (2-Way Active) Very Clean (PAIR)

->The price shown is for the pair.
->100% functional
->There are various scratches here and the
->See the pictures
->Please serious buyer
->Delivery everywhere in Canada and the United States,
->Shipping prices outside the United States and Canada are indicated by a fictitious amount of $1. To get your shipping price, you must give us your complete delivery address (street address, city, state, country and your code)
->The Price Indicated for transport may vary depending on the region where you are located.
->All our products are shipped in safe quality packaging.

NOTE: These are Electro-Voice were in a corporate installation; they were in a
non-smoking environment and have never been on the road.

Specifications;

Frequency Response (measured in far field, calculated to one meter on axis, swept sine wave, one watt into LF section - 2.83 V at 250 Hz, anechoic environment; see Figure 2): 60-16,000 Hz Crossover Frequency: 1,500 Hz Efficiency, LF/HF: 4.8/25 % Maximum Long-Term-Average PowerHandling Capacity (per ANSI/EIA RS- 426A 1980), LF/HF: 300/75 watts Maximum Long-Term-Average Midband Acoustic Output, LF/HF: 14/19 acoustic watts Sensitivity (SPL at one meter, indicated input power, anechoic environment, average level), LF/HF, 1/1 watt: 99.0/110.0 dB 300/75 watts: 123.8/128.8 dB Beamwidth (angle included by 6-dBdown points on polar responses, indicated one-third-octave bands of pink noise; see Figures 1 and 3), Horizontal, 1,200-16,000 Hz: 80° (+15°, -30°) Vertical, 1,200-16,000 Hz: 55° (+70°, -20°) Directivity Factor, Rθ (Q), 1,200-16,000 Hz Average (see Figure 4): 12.3 (+4.0, -6.0) Directivity Index, Di , 1,200-16,000 Hz Average (see Figure 4): 10.9 dB (+1.2 dB, -2.9 dB) Distortion (115 dB SPL at one meter, shaped spectrum; see Figure 5), Second Harmonic, 100 Hz: 1.3 % 500 Hz: 0.9 % 2,000 Hz: 1.6 % 5,000 Hz: 1.3 % Third Harmonic, 100 Hz: 6.0 % 500 Hz: 1.1 % 2,000 Hz: <0.1 % 5,000 Hz: <0.1 % Transducer Complement, HF: DH6 driver, HP-type 80°x55° horn LF: DL-type 12-in. woofer Impedance (see Figure 6), Nominal, LF/HF: 8/16 ohms Minimum, LF/HF: 8.5/13.4 ohms Input Connections: Two Neutrik NL4MPR Speakon®