Furman CN-15MP 15A 2-Outlet Remote Power Sequencer, Contractor MiniPort
The Furman Contractor Series CN-15MP MiniPort is the definitive solution for providing remote AC power control to equipment located away from the main system rack, such as powered speakers. Engineered with Furman's SmartSequencing technology, this unit allows multiple MiniPorts to be daisy-chained over runs e 1,000 feet apart, with bi-directional communication for reliable sequencing of large and complex systems. It offers a 15 Amp capacity with a thermal breaker and features two NEMA 5-15R outlets. For ultimate equipment safety, the CN-15MP includes Extreme Voltage Shutdown (EVS), which protects against sustained under-voltage (below 80V) or over-voltage (over 145V) events. Sequencing can be initiated remotely via standard analog triggers or a digital link from a CN-1800S or CN-2400S, providing maximum installation flexibility for any commercial AV system.
Contractor Series MiniPorts extend the benefits of SmartSequencing to electronics outside of the equipment rack, providing tremendous flexibility to any installation scenario. Units may be daisy-chained and fully controlled via a Furman SmartSequencer, legacy Furman sequencer, third-party sequencers, and/or control and automation systems.
DIP switches and potentiometer allows customization of settings such as sequencing delays, 12V on/off, and more. Security covers are provided to prevent unauthorized personnel from tampering with DIP switches.
Sequencing of duplex initiated remotely by standard analog triggering (remote terminal) or digital link (SmartSequencing from CN-1800S or CN-2400S).
The CN-15MP can shut itself off automatically when triggered by a fire alarm.
Technical Specifications
Family
Contractor Series
Line Voltage
120 Volts
AC Voltage Input Range
90-139VAC, 50/60Hz
Maximum AC Current Rating
15 amps (Thermal breaker)
AC Cord
3/14AWG, 10 feet, black, fixed, NEMA 5-15P plug
AC Receptacles
2 NEMA 5-15R’s (1 duplex)
AC Undervoltage Protection
EVS, 77VAC+/-3VAC
AC Overvoltage Protection
EVS, 140VAC+/-5VAC
AC Overvoltage Reset Modes
Manual and Auto-reset (configurable)
Operating Temperature Range
5°C (40°F) to 40°C (105°F)
Humidity Range
<90% Relative Humidity
Circuit Breaker
Pushbutton, 15A
Front Panel Diagnostic Indicators (LED)
Power, Extreme Voltage, Primary Link, Secondary Link
Side Panel DIP Switch Features
1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off, GND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
Side Panel Potentiometer
Allows fine-tune delay adjustments
Remote Terminal
+5-30VDC In, 12VDC (12mA) Out
SmartSequencing
Phoenix-type 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop – 1000’ nominal)
Remote Terminal
Phoenix-type 5-Pin Connector With Screw Terminals; +12V, STAT, REM, GND, DLY_OUT (Class 1 Wiring)
Force Off
Phoenix-type 2-Pin Connector With Screw Terminals, FORCE OFF (Class 1 Wiring)
RS-232 Compatible
Yes, indirectly, when connected via SmartSequencing to a Furman Smart Sequencer with an RS-232 port
Voltmeter
Available with SmartSequencing, ±2VAC accuracy
Ammeter
Available with SmartSequencing, ±1A accuracy
Power Consumption (No Load)
10 Watts
Safety Agency
CSA, RoHS Compliant
UPC
654061028475
Proposition 65 Warning
WARNING: Cancer and Reproductive Harm –
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
| Categories |
Product safety information may be available here.

