Musikraft Charvel / Fender Strat Replacement Neck

This is a Musikraft replacement neck for Charvel-style Strat guitars. It is a bolt-on replacement for USA Fender Strat - same scale length and heel width, but with the squared off fretboard end like a Charvel. Includes the locking Gotoh tuners as pictured.

The feel of a neck is subjective, but for me this is supremely comfortable to play, with a narrow vintage-style nut width, rolled fretboard edges, asymmetric EVH profile, large 6100 frets, and satin finish. If you like a 60's style neck that easily sits in your palm, and don't mind the strings being close to the fretboard edge, this is a great setup.

I first installed this myself, before getting the frets leveled by a pro. It plays good now, but could still use a polish and final setup. There are some scratches in the fingerboard around the 11th fret from a file running parallel to the frets, but they aren't very deep. I believe you could sand them out and touch up the finish. There are also a few nicks in the wood from rounding the fret ends, but nothing major.

Order details

Charvel® Neck Custom Build × 1

Construction Type: 1 Piece Constructed

Orientation: Right for Right Handed Players

Scale Length: 25.5" Standard Fender

Number of Frets: 22

Nut Width: 1.650" (41.9mm)

Nut Slot Style: 1/8" Nut Slot (Standard Fender)

Heel Width and Type: 2-3/16" (55.55mm) Rounded Strat

Truss Rod Type: Single Acting w/ Vintage Nut adjust @ Heel

Shaft Wood: Rock Maple

Fingerboard Radius: 12"

Fingerboard Edge Style: Heavy Rolled Fingerboard Edges ($40.00)

Tuner Hole Size: 10mm (Modern Style Keys)

Top Inlay Type: 1/4" Dots (Black)

Side Markers: (Larger) Black 3/32" (1 pc necks only)

Side Dot Location: Center of Fingerboard Wood

12th Dot Spacing: Wide (Vintage Style Pre 1964)

Fret Size and Type: 6100 Nickel Silver (Jumbo)

Skunk Stripe Option 1pc: Standard Walnut

Back Profile Shape and Size: AYS 81 91 (EVH)

Nut Installation: Install Slotted TUSQ Nut ($35.00)

Finish: Thin Lacquer Sealer (Very Thin Coating) ($20.00)

Neck Mounting Holes: Drill Neck Mounting Holes Standard Fender Pattern