Marshall Marshall DSL40C 40-Watt 1x12 All-Tube Combo Amp 2017
Pure, unfiltered Marshall valve tone in a versatile 1x12 package. Driven by classic EL34 tubes and a 12" Celestion speaker, the DSL40C delivers everything from warm vintage JTM45 cleans to aggressive, high-gain JCM800 roar. With dual foot-switchable channels (Classic Gain and Ultra Gain) each featuring two modes, Pentode/Triode power reduction (40W down to 20W), and built-in studio-quality digital reverb, this amp is equally suited for bedroom practice, studio tracking, or blasting through gig venues.
Highlights:
- All-tube construction (4x 12AX7 preamp, 2x EL34 power tubes).
- Pentode/Triode half-power switch for cranked tube tone at lower volumes.
- Celestion Seventy 80 speaker with FX loop and footswitch included.
Identification Overview
- Model: Marshall DSL40C
- Type: All-Tube Guitar Combo Amplifier
- Series: Dual Super Lead (DSL) Series
- Output Power: 40 Watts RMS (switchable to 20 Watts)
- Speaker: 1x12" Celestion Seventy 80 (16 Ohm)
Construction & Format
- Cabinet Material: High-Density MDF with Black Tolex Covering
- Grille Cloth: Black Grille Cloth with White Marshall Logo
- Handle: Recessed Top Carrying Handle
- Corner Protectors: Black Plastic Corners
- Dimensions: 620 mm x 490 mm x 252 mm (24.4" x 19.3" x 9.9")
- Weight: 22.9 kg (50.5 lbs)
Valves / Tubes
- Preamp Tubes: 4 x ECC83 / 12AX7
- Power Amp Tubes: 2 x EL34
Channels & Voicings
- Classic Gain Channel:
- Clean Mode (sparkling clean tones)
- Crunch Mode (vintage breakup to classic overdrive)
- Ultra Gain Channel:
- Lead 1 Mode (high-gain rhythm and crunch)
- Lead 2 Mode (searing lead distortion)
Controls & Front Panel
- Classic Gain Controls: Volume, Gain, Clean/Crunch Mode Switch
- Ultra Gain Controls: Volume, Gain, Lead 1/Lead 2 Mode Switch
- Equalization (Shared):
- Treble, Middle, Bass
- Tone Shift Switch (re-shapes mid frequencies)
- Presence (high-frequency power amp control)
- Resonance (low-frequency power amp control)
- Reverb: Digital Reverb with independent level controls for Classic Gain and Ultra Gain channels
Rear Panel Features
- Power Output Switch: Pentode/Triode Switch (40W Full Power / 20W Half Power)
- Effects Loop: Series FX Loop with On/Off Bypass Switch
- Speaker Outputs: 3 x 1/4" Jacks (1 x 16 Ohm, 2 x 8 Ohm / 1 x 8 Ohm, 2 x 16 Ohm configuration)
- Footswitch Jack: 1/4" Jack for PEDL-90001 channel/reverb footswitch
Included Accessories
- 2-Button Footswitch (Channel Selection & Reverb On/Off)
- Detachable IEC Power Cable
***Shipping costs will be adjusted to the actual cost. Current shipping rates are based on established estimates.***
Questo articolo è venduto "Come da descrizione”
Questo articolo è venduto "Come da descrizione" e non può essere restituito a meno che non arrivi in condizioni diverse da come è stato descritto o fotografato. Gli articoli devono essere restituiti nelle condizioni originali in cui sono stati spediti, con tutti gli imballi originali.Scopri di più.
| Pubblicato | 7 giorni fa |
|---|---|
| Condizione | Molto buono (Usato) Gli articoli "Molto buoni" possono mostrare qualche piccolo segno o graffio ma sono pienamente funzionali e in buone condizioni generali.Scopri di più |
| Marchio | |
| Modello |
|
| Categorie | |
| Anno |
|
| Prodotto in |
|
| Numero di ingressi |
|
| Tipo di Tubo di Potenza |
|
| Numero di canali |
|
| Effetti incorporati |
|
| Configurazione diffusori |
|
| Elettronica |
|
| Reverb |
|
| Uscita diretta |
|
| Effetti Loop |
|
| Famiglia colore |
|
| Potenza di Uscita (Watt) |
|
Le informazioni sulla sicurezza del prodotto sono disponibili qui.






