BSS BLU-USB BLU Link Accessories

The BSS BLU-USB is a compact, bus-powered interface designed to integrate analog and digital audio into networked BLU Link systems. Its small footprint and minimal power draw make it an efficient bridge between computer-based audio and professional signal distribution networks.

Network Connectivity & Audio Performance

Two RJ45 Ethernet connectors link the unit to a BLU Link network, supporting cable runs up to 100 meters on Category 5e cable and accommodating up to 60 nodes across the system. Audio latency remains transparent at 0.08ms at 48kHz and 0.04ms at 96kHz, while sample rate support spans 8kHz–192kHz with both 16-bit and 24-bit bit depths available.

Operation & Specifications

Operation modes depend on driver installation: Class 1 (no driver) delivers 2×2 plug-and-play I/O at 48kHz, while Class 2 (with driver) expands to 8×8 at 48/96kHz. Power consumption is minimal at 4 watts, with universal mains input from 100–240V AC, 50/60Hz, and the unit operates reliably across 5–35°C.

Key Features

• 2×2 plug-and-play operation at 48kHz (Class 1, no driver required)
• 8×8 operation at 48/96kHz with driver installed
• Support for sample rates from 8kHz to 192kHz
• 16-bit and 24-bit bit depth compatibility
• Two BLU Link RJ45 Ethernet connectors
• Maximum cable length of 100 meters on Category 5e cable
• Pass-through latency of 0.08ms at 48kHz / 0.04ms at 96kHz
• Supports up to 60 nodes on a BLU Link network
• 4-watt power consumption
• Universal mains voltage: 100–240V AC, 50/60Hz
• Operating temperature range: 5–35°C (41–95°F)
• Compact dimensions: 3.85″ W × 1.57″ H × 5.67″ D; weight 1 lb (0.45 kg)

The BLU-USB excels in networked professional environments where extended cable runs, low latency, and scalable I/O count matter most.