Loop-Master Pedals 2-Button Footswitch for Peavey Amps – Classic 30/50, Bandit, Delta Blues

LOOP-MASTER PEDALS 2-BUTTON FOOTSWITCH FOR PEAVEY STYLE AMPS

A compact two-button footswitch for compatible Peavey amplifiers that use a standard 1/4" TRS two-function footswitch connection.

The Loop-Master Pedals Peavey Style Footswitch provides two independent amp-control functions through a single TRS cable while taking up very little pedalboard space.

Depending on your amplifier, the two switches can control channel selection, boost, effects, reverb or other amp-specific functions.

Two switches. One TRS connection. No power required.

WHAT IT DOES

• Two-button amp footswitch

• Two independent latching controls

• Single 1/4" TRS connection

• Designed for compatible Peavey amp switching

• Functions determined by the connected amplifier

• Completely passive operation

• No battery or power supply required

• Heavy-duty footswitches

• Premium TRS jack

• Compact pedalboard-friendly enclosure

• Handcrafted in the USA by Loop-Master Pedals

COMPATIBLE PEAVEY APPLICATIONS

Designed for compatible Peavey amplifiers that use the standard two-button stereo/TRS footswitch system.

Compatible applications include many models from the Peavey lineup, including:

• Classic 30

• Classic 50

• Classic 100

• Delta Blues 115

• Delta Blues 210

• Bandit

• Studio Pro

• Envoy

• Express 112

• Bravo 112

• Supreme

• Special 112 / 130 / 150

• Backstage

• Blues Classic

• Special Chorus 212

• Various other compatible Peavey amplifiers

Compatibility varies by model and production year.

WHAT CAN IT CONTROL?

The two functions depend on the particular Peavey amplifier.

Depending on the model, they may control:

• Channel selection

• Clean / Lead

• Rhythm / Lead

• Boost

• Crunch

• Effects On / Off

• Reverb

• FX Loop

• Other amp-specific functions

The amplifier determines what each switch controls.

HOW IT WORKS

Connect the Loop-Master Pedals footswitch to the compatible Peavey amplifier using a standard 1/4" stereo/TRS cable.

The two switches independently control the Tip and Ring functions of the TRS connection.

Press either switch to change the corresponding amp function.

No programming or setup is required in the footswitch itself.

COMPACT DESIGN

At only 3.63" × 1.5", this controller takes up very little pedalboard space.

It's a great alternative when you want two amp-control functions without dedicating a large section of your pedalboard to a conventional factory footswitch.

Great for:

• Compact pedalboards

• Crowded pedalboards

• Fly rigs

• Backup rigs

• Keeping your original factory footswitch at home

• Integrating amp switching directly into your pedalboard

LATCHING SWITCHING

This controller uses two latching footswitches.

Press a switch and it changes state.

Press it again and it returns to the previous state.

Your amplifier must be compatible with standard latching contact switching through a 1/4" TRS connection.

DIMENSIONS

• 3.63" × 1.5" × 1.06"

• 9.22 × 3.81 × 2.69 cm

• 92.2 × 38.1 × 26.9 mm

POWER

No power required

CONNECTION

• 1 x 1/4" TRS control jack

A standard stereo/TRS cable is required.

TRS cable is not included.

CONSTRUCTION

• Two heavy-duty latching footswitches

• Premium TRS jack

• Rugged aluminum enclosure

• Completely passive operation

• Compact pedalboard-friendly footprint

• Handcrafted in the USA by Loop-Master Pedals

IMPORTANT COMPATIBILITY NOTE

This footswitch is designed for compatible Peavey amplifiers that use a standard two-button 1/4" TRS latching footswitch connection.

Peavey has used several different footswitch systems over the years, so this is NOT a universal replacement for every Peavey amplifier.

Some Peavey models use momentary, multi-button, MIDI or other specialized footswitch systems and are not compatible with this controller.

Compatibility can also vary between different generations of the same amplifier model.

If you're unsure whether your amplifier is compatible, contact us with the exact Peavey model and approximate year before ordering.

This is a Loop-Master Pedals product and is not manufactured by or affiliated with Peavey.

TRS cable not included.