Inspired by Gibson Custom’s Pre-War King of the Flat-Tops

After the Gibson SJ-200 was launched in 1937, it quickly earned the title “the King of the Flat-Tops” due to its superior sound, physical size, outstanding projection, and majestic appearance. The earliest model years of the SJ-200 used rosewood for the back and sides, and this was switched to maple in 1947. Due to the harsh realities of the economy after the Great Depression, there was limited demand for the top-of-the-line SJ-200, and consequently, relatively few were produced. The rare rosewood-bodied pre-war SJ-200 models have become highly prized by today’s collectors, which has driven their used prices up significantly on the vintage guitar market. Now, Epiphone has partnered with Gibson Custom to create an Inspired by Gibson Custom recreation of this vintage icon, making it more readily available for today's players to enjoy. The Epiphone Pre-War SJ-200 Rosewood Reissue is replete with vintage-inspired details, including solid rosewood back and sides, a thermally aged solid spruce top with traditional scalloped X-bracing made from quarter-sawn solid spruce, and a two-piece maple neck with a rosewood stringer and Round D profile and is attached to the body with a glued-in dovetail joint. The ebony fretboard is adorned with mother-of-pearl graduated Crown inlays and equipped with 20 standard frets. The SJ-200 style pickguard has vintage-style graphics, and the ebony SJ-200 open two-bar Moustache™ bridge has mother-of-pearl inlays. The nut, compensated saddle, and bridge pins are all made of bone. The Gibson “open book” headstock features a vintage Epiphone logo and a Gibson Crown inlaid in aged mother-of-pearl and has a stinger and an Inspired by Gibson Custom Double Diamond logo etched on the rear. In a nod to the needs of modern musicians, it comes with an under-saddle Baggs™ VTC piezo pickup and active preamp with soundhole-mounted volume and tone controls pre-installed, so it is stage and studio ready, straight out of the included Red Line-inspired hardshell case with Inspired by Gibson Custom graphics.

Highlights

• Rosewood back and sides
• Thermally aged solid spruce top
• Two-piece maple neck with rosewood stringer
• Bound ebony fretboard with mother-of-pearl graduated crown inlays
• Grover Imperial tuners
• Two bar Moustache bridge with mother-of-pearl inlays
• Baggs VTC pickup system
• Red line-inspired hardshell case with Inspired by Gibson Custom graphics
• 
  Guitar Specifications
• Body Specs

BackSolid Rosewood

BindingMulti-ply Top, Back, and Headstock, Single-ply Fretboard

Body FinishVintage Gloss

Body MaterialSolid Rosewood

Body ShapeSJ-200

Body StylesJumbo

BracingTraditional Scalloped X-Brace; Quarter Sawn Solid Spruce

SideSolid Rosewood

TopThermally Aged Solid Spruce

Neck Specs

Fingerboard MaterialEbony

Fingerboard Radius304.8mm / 12.0in

Fret Count20

FretsStandard

InlaysMother of Pearl Graduated Crown

JointGlued In, Set Neck; Dovetail Joint

Neck Material2-piece Maple with Rosewood Stringer

Nut MaterialBone

Nut Width44.2mm / 1.74in

ProfileRounded D

Scale Length647.7mm / 25.5in

Electronics Specs

ControlsSoundhole Mounted Volume and Tone

Output Jack1/4" Endpin

PreampBaggs VTC

Under Saddle PickupBaggs VTC

Hardware Specs

BridgeEbony SJ-200 Open Two Bar Moustache with Mother of Pearl Inlays

Bridge PinsBone

PickguardSJ-200 with Vintage-style Graphics

Saddle MaterialCompensated Bone

Strap ButtonsEndpin Jack

Truss RodDual Action

Truss Rod Cover2-ply Black, Wide White

Tuner PlatingGold

Tuning MachinesGrover Imperial

Misc Specs

CaseRed Line-inspired Hardshell with Inspired by Gibson Custom Graphics

Model: ECPW200VSGH1

HeadstockGibson Open Book with Stinger and Inspired by Gibson Custom Logo on Rear

Headstock InlayVintage Epiphone Logo and Gibson Crown in Aged Mother of Pearl

Strings Gauge.012, .016, .024, .032, .042, .053