PM Foundations Voltage Controlled Sequential Switch DIY Eurorack PCBs

DIY - PCBs ONLY

** THIS IS THE BLACK PANEL EDITION - SOME PHOTOS SHOW PURPLE EDITION**

This is a versatile four way switch that can be driven by a clock to operate as a sequential switch. It can also be voltage controlled and manually switched. The jacks operate as one input to four switched outputs or four switched inputs to one output.

• Clock input for sequential operation.
• Manual control sets the current switch position.
• The control also sets the maximum switch position before reset when in sequential mode.
• Voltage input sets the switch position based on a control voltage 0-5V.
• Reset input uses a gate trigger to reset the switch to position 1.
• Manual reset switch.

Build it yourself - This is a set of 1 high quality PCB and 1 front panel ONLY for users who want to purchase their own components and build their own module. Some product photos above show COMPLETED build.

The module (when using our front panel) is Eurorack size and only 6HP wide.

Ideal module for use with our Clock, Clock Divider and Synthola sequencer.

Comprehensive documentation, parts lists and firmware available for building, testing and using the module.

Various switch options for the momentary switch:

• eSwitch LC1258OANP or LC1258OASP
• C&K PN11SHSA03QE or PN11SHNA03QE
• ALPS SPPJ311500

Please use the eSwitch caps only for all these items: Mouser 612-1R-xx

Documentation: personalcircuits.com