The Infinity 3 is Pigtronix's deluxe stereo double looper with MIDI. This bundle includes the Universal Remote, which unlocks the looper's extra functions. **Infinity 3 highlights** - Two stereo loops that play in **series** (verse/chorus style) or **parallel** (stacked), with sync, multiply, and cue options - Instant record, play, overdub, undo, and redo, with latency-free looping - 24-bit recording with analog pass-through and discrete analog limiters - Variable sample rate / varispeed: shift recorded loops in pitch and speed in semitone steps over two octaves - Up to 50 loop pairs of storage (Pigtronix quotes about 3 hours of recording time) - Stereo/Split inputs, Out 1/Out 2, and Aux 1/Aux 2 loop-only outputs (useful as a monitor send to a drummer or front of house) - Full MIDI: clock sync with jitter correction, plus CC/note control of every feature - Expression input for loop volume, loop aging, or varispeed - Runs on 18V DC (the factory supply is 18V, 300 mA, negative tip) **What the Universal Remote adds** The Universal Remote is a passive three-button momentary footswitch that needs no power. It connects to the Infinity 3's Undo jack with a 1/4" TRS cable. Per the Infinity 3 manual, it gives you: - **Undo / Redo** of your last overdub, plus Record → straight to Overdub, and instant erase of a stopped, armed loop - **Reverse** playback, and flipping between forward and reversed versions of the same layer - **Varispeed remote**: hold the Reverse switch for 2 seconds and the switches step loop pitch down or up by a set musical interval (an octave by default). A third switch snaps back to the original speed. Without a remote, these functions aren't available from your feet, so the two pieces really belong together. **Condition:** Like New (both pieces). **Included:** Infinity 3 looper and Universal Remote, as pictured.