This is a used 920D 3-way REVERSED (Knobs at top, then switch). Works great!

* This is for adventurous solder savvy users ----

* THIS DOES NOT COME WITH THE OUTPUT JACK - You can use an existing one, or replace

* Existing wiring has just been snipped, you will need to de-solder first

* Black plastic switch top was replaced with a 3rd party black tip and glued on

* Does NOT come with screws to mount control plate into guitar

There is an 920D online install guide to help with what goes where for solder points.

• Ships to lower 48 residential only. 

• No PO Box or international shipping companies

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

920D Custom 3-Way Control Plate Upgrade (Reversed, Knobs Forward) for Telecaster Guitar

Telecaster® 3-Way Control Plate Upgrade (Reversed, Knobs Forward)

Our Reversed, Knobs Forward 3-Way Control Plate Upgrade is identical in function to our standard 3-Way Control Plate Upgrade. The only difference is the changed positions of the switch and knobs.

Pre-wired and drop-in ready, it's built to completely clean up your tone and let the full quality of your pickups shine through. Consider our Control Plate the ultimate upgrade to polish and improve your tone.

Components

1 - Chrome Control Plate

2 - Chrome Knurled Flat Knobs

2 - 920D Custom 450G Series 250K Pots by CTS

1 - Genuine CRL USA 3-Way Switch with Black Switch Tip

1 - .022 Orange Drop Capacitor by Sprague Electric

** Pure Tone Output Jack (THIS IS NOT INCLUDED - CAN USE EXISTING OUTPUT JACK, OR REPLACE)

920D Custom Signature Wiring by Gavitt Wire

Switch Positions

Bridge

Bridge / Neck

Neck