KHDK Electronics KHDK Electronics Korn Indigo Sludge | "Head' Brian Welch of Korn signature limited edition preamp/fuzz/distortion pedal 2026 - Black n Gold

Brand new. Never used.

Brand new never used. All the boxes and materials come with it. The other half of the Korn sound is here. The Munky pedal sold out in 24 hours. For those who got one, this is the other half of the rig. For everyone else...this is your second chance. Only 500 will ever be made. Each one a faithful recreation of the rare modified tube amp and heavily-modded fuzz that powered Korn's '94-'96 Indigo Ranch sessions with Ross Robinson. Two independent sections in one box, with a phase-aligned sub-octave built for massive walls of sound."This pedal isn't 'inspired by' - it's built on the same ingredients that forged the sound.

Plug in and feel that electricity."~ Brian "Head"

WelchEvery unit ships with a Certificate of Authenticity personally signed by Head. Specs: Controls & FeaturesTwo independent sections with separate bypass stomp switches. Run the preamp alone into a different power amp or booster, run the fuzz on its own, or stack them. Preamp SectionCaptures the tone, character, and dynamics of the rare, modified tube amp from the original Indigo Ranch rigs - tight, saturated crunch with full dynamic response.Bass - Low-frequency response.

Clockwise for punch and fullness, counterclockwise to tighten. Mid - Clockwise for presence and cut, counterclockwise to scoop for hollow rhythm tones. Treble

- Clockwise for brightness and bite, counterclockwise for warmth. Gain - Preamp saturation, from clean and dynamic to aggressive high-gain.Master - Overall preamp output level. Presence - Top-end clarity to cut through the mix.EQ controls interact naturally with each other, the way a real amp behaves. Distortion SectionA

during the '94-'96 sessions. Gritty, relentless fuzz built for

Saturation, from subtle grit to thick, aggressive fuzz. Tone

• Brightness and bite of the distorted signal. Volume - Output level of the distortion stage. Octave SwitchCustom phase-aligned sub-octave circuit, fully integrated into the distortion section. Three positions, no extra controls needed:Down - Off. Dry signal only. Middle - 25% blend. Subtle sub-octave thickness, clarity preserved. Up
• 50% blend. Massive low end filling the full low/mid spectrum. Internal Output Level Switch (LOW / HIGH)A slide switch inside the enclosure (upper-right corner, accessible by removing the bottom plate) sets the preamp's output level for your rig. LOW - For a standard guitar amp's clean channel. Keeps output safe for typical amp inputs. HIGH - Hotter, line-level signal for power amp inputs, effects returns, or running direct to a mixing console. Set it once and leave it. Not designed for frequent adjustment. For the most accurate, full-range sound, run the pedal directly into a power amp or console. A clean amp channel works, but the tightest low end and full dynamic range come through when you skip the preamp stage of a regular amp. If you do go through a clean channel, lower the input gain and switch off any bright or treble-enhancing features.Connections & Powerlnput -

1/4' instrument input from your guitarOutput - 1/4" to amp or pedalboardPower - 9V DC, center-negative, regulated, minimum 80 mABypass - True bypass on both sectionsSpecificationsPower Supply9V DC, center-negativeCurrent Draw80 mAInput Impedance 1 MQOutput Impedance6 kQ (HIGH) / 65 kg (LOW)BypassTrue bypassDimensions4.62" × 3.65" × 2.2" (117 × 93 × 56 mm)