The American Ultra II Stratocaster features a carefully selected alder body with deep body contouring. The quarter-sawn maple neck features a Modern gDh neck profile, and the neck back is finished with a smooth-to-the-touch Ultra Satin finish.
The 10?14-inch compound radius ebony or quarter-sawn maple fingerboard features the Ultra Rolled Edge design with carefully rounded edges, and is equipped with medium-jumbo frets, glow-in-the-dark Luminlay side dots, and a Graph Tech TUSQ nut. The tapered neck heel and deep body contour provide easy access to the higher frets.

The American Ultra II Stratocaster is equipped with three Ultra II Noiseless Vintage Strat pickups, delivering superb, hum-free tone?ranging from sweet, crystal-clear clean tones to scorching lead sounds.
The patented S-1 switch enables unique pickup configurations, further expanding the range of sounds. It features highly practical features such as a two-point-mounted American Ultra synchronized tremolo with a pop-in arm, a polished stainless steel block saddle, cold-rolled steel blocks, deluxe locking tuning machines, soft-touch knobs, and a 1-ply anodized pickguard.

There are some signs of use, such as scratches on the body jack, scuff marks on the fingerboard, and scuff marks on the pickguard; however, the guitar is in relatively good condition with no major or conspicuous damage.

Condition Grade: B+: Has some minor scratches, but is in good enough condition for normal use

Serial Number: US240023120
Year of Manufacture: 2024
Country of Manufacture: United States
Case: Hard Case
Accessories: Arm, wrench, strap-side locking pin
Weight: 3.72 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Fret Wear: No issues; in like-new condition
String Height (Low-String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.3 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 22.4 mm
Scale: 648 mm (25.5")
RADIUS: 254 mm (10") ? 356 mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we do not guarantee that the measurements will be identical when the item arrives.

* This item is a one-of-a-kind product, and we list it simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.