The Furman PL-Plus II Power Conditioner with Voltmeter is all about safety for your expensive pro audio equipment. An advanced Series Multi-Stage Protection Plus (SMP+) circuit provides rock-solid, maintenance-free extreme surge suppression with zero ground contamination thanks to Linear Filtering Technology (LiFT). A front-panel meter provides precise monitoring of incoming AC line voltage from 90 to 128V. Unit has 8 rear-panel outlets and one front-panel outlet, a 15-amp rating with circuit breaker, retractable LED rack lights with on/off/dimmer control, BNC back-panel connector for gooseneck lamp with front-panel switch, and a front-panel circuit breaker. Fits in one rack unit and comes with a 10', 14-gauge, heavy-duty power cable, and 3-year limited warranty.

Furman's Series II power conditioners feature the Series Multi-Stage Protection Plus (SMP+) circuit and the exclusive Linear Filter Technology (LiFT). The maintenance-free SMP+ surge suppression handles the most extreme transient voltage spikes are safely absorbed, clamped, and dissipated without destruction of the circuit. LiFT takes ensures optimal performance through linear filtering with no leakage to ground, protecting the audio and video quality of your signal. 

Series II units have super-bright, long-life, retractable LED rack lights that produce virtually no heat and provide an extremely long life span. There is an on/off/dimmer control for the lights. A BNC back-panel connector will accommodate a gooseneck lamp for rear-rack illumination.  A front-panel switch controls the gooseneck's operation. The Series II units occupy one rackspace each and have a convenient front-panel mounted outlet.

A master switch controls operation of the rear outlets, and the front-panel circuit breaker can be quickly and easily reset should the unit be overloaded. The Series II conditioners come with a 10', 14-gauge, heavy-duty power cable.

Specs

• Maintenance-free surge suppression
• Series Multi-Stage Protection Plus (SMP+) circuit with extreme voltage shutdown
• LiFT (Linear Filtering Technology) with zero ground contamination
• 8 rear-panel outlets and one front-panel outlet
• 15-amp rating, with circuit breaker
• Meter for line voltage ranging from 90 to 128V
• Retractable LED rack lights with on/off/dimmer control
• BNC back-panel connector for gooseneck lamp with front-panel switch
• Master switch control of rear outlets
• Front-panel circuit breaker
• One rackspace
• 10', 14-gauge, heavy-duty power cable

• Dimensions: 1-3/4"H x 19"W x 10-1/2"D
• Weight: 11 lbs. (5 kg)
• Construction: Steel chassis, .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
• Current rating: 15 amps
• Operating Voltage: 90 to 140 VAC
• Over Voltage Shutdown: 140 VAC typically
• Voltmeter Accuracy: PL-PLUS II only: ±2 VAC, calibrated with internal trimpot adjustments
• Spike Protection Modes: Line to neutral, zero ground leakage
• Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA/CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
• Response time: 1 nanosecond
• Maximum surge current: 6,500 amps
• Noise attenuation: 10dB @ 10kHz, 40dB @ 100kHz, 100dB @ 10MHz”Linear attenuation curve from 0.05 - 100 Ohms line impedance
• Power consumption: 11W
• Safety Agency Listings: CE, NRTL-C