This mic has never been used and is still in its factory-sealed case, with the plastic intact around it. The first three pics are of this actual mic, and the other pics are of a second, never-used AKG C214 Large-diaphragm Condenser Microphone that I am also selling.
I purchased it new at Sweetwater in December of 2022. Sadly, it has been sitting on a shelf in the closet and has never been out of the house.
I am also selling a second, never-used AKG C214 large-diaphragm condenser microphone. You could pick up both of these and have a set of two new mics.
This exact mic is currently being sold new at Sweetwater for $469. You can save yourself $80.
Large-diaphragm Cardioid Condenser Microphone with 143dB Dynamic Range, Switchable 20dB Attenuation, and Low-cut Filter.
The AKG C214 is a professional large-diaphragm condenser microphone engineered by AKG as a highly affordable, cost-effective alternative to the legendary C414 microphone family. It captures sound using a single-sided design derived from the legendary C414 dual-capsule system coupled with AKG’s patented Back-Plate Technology, delivering an outstanding sonic signature close to the famous C414 XLII.
The combination of an ultra-low 13 dB-A noise floor and a staggering 156 dB maximum SPL threshold makes the AKG C214 exceptionally versatile. It is widely used in professional and project studios for tracking high-pressure sound sources like amplified electric guitar cabs, overhead drums, and brass instruments. Concurrently, its superb dynamic range ensures a polished character for highly expressive signals such as lead vocals, grand pianos, and orchestral strings.
Capsule Engineering: Features a supreme 1-inch edge-terminated capsule sitting on an integrated suspension mechanism. This structural decoupling significantly reduces stand vibrations and mechanical handling noise.
Cardioid Polar Pattern: Utilizes a fixed, unidirectional cardioid polar pattern. This design focuses primarily on capturing sound from the front of the capsule while minimizing background ambiance and bleed from the sides and rear.
Onboard Controls: Outfitted with two physical side switches: a -20dB pre-attenuation pad for managing extreme volume peaks, and a 160 Hz bass-cut filter (6 dB/octave) to eliminate low-end rumble and neutralize the proximity effect.
Build Quality: Features a roadworthy, all-metal die-cast body wrapped in a scratch-resistant finish. The capsule is further shielded by a robust double-mesh grille designed for high RF immunity without coloring the acoustic pickup.
Specification Details:
Audio Frequency Bandwidth: 20 Hz – 20,000 HzSensitivity20 mV/Pa (-34 dBV/Pascal)
Equivalent Noise Level (Self Noise): 13 dB-A (Ultralow floor)
Signal to Noise Ratio:81 dB-A (A-weighted)
Maximum SPL: 136 dB (up to 156 dB SPL with the -20dB pad active)
Dynamic Range: 143 dB for pristine, uncompressed transients
Electrical Impedance: 200 Ohms (Recommended load impedance: 1000 to 2000 Ohms)Powering Requirements: 12V to 52V Phantom
Power Output Type: Balanced 3-pin Male XLR with gold-plated contacts
Net Weight: 290 g (0.62 lbs)
| Publicado | hace un mes |
|---|---|
| Estado | Excelente (segunda mano) Los productos excelentes casi no tienen ninguna imperfección ni defecto visual, y han sido usados con el máximo cuidado posible.Más información |
| Marca | |
| Modelo |
|
| Acabado |
|
| Categorías | |
| Año |
|
| Hecho en |
|
| Tipo de micrófono |
|
| Con cable/Inalámbrico |
|
| Patrón polar |
|
| Electrónica |
|
La información de seguridad del producto se encuentra disponible aquí.

















