Yamaha CR-620 Late 70’s - Wood laminate

Yamaha CR-620

YAMAHA NATURAL SOUND SERIES FM/AM STEREO RECEIVER

Cleaned- switches and controls where necessary, new lamps, resoldering board as needed plays like it’s ready for a new room.

FEATURES:
FM Front End with NFB-PLL Multiplex Decoder.
Pilot Tone Suppression (Special Active Filter)
FM Muting; FM Mono. Tape-to-Tape (1>2/2>1).
Tone Controls (Bass/Treble), Filter (Low/High).
Continuously-Adjustable Loudness. 
Separated Input/Output Switches for Simoultanious Operating.
Analog Meters (Signal Strenght/Center Tune/Multipath).
Speaker Selection (A, B), 2 Headphone Jacks. 

POWER SUPPLY: AC 120 V, 50/60 Hz 190 Watts

1. GeneralSystem: Transistor Receiver Colour: 1=Silver, 2=Black: 1 Power consumption: 270 W @ 120/240 VPre AmplifierInputs: Phono MM; Tape I+II; AUX. Quadro: no Inp. Sensitivity High Level: RCA 120
DIN 30 mVInp. Impedance High Level: 45 kΩFrequency Response High Level: 20-20,000 Hz (±0.5 dB) HZSignal/Noise High Level: 97 dbInp. Sensitivity Phono MM: 2 mVInp. Impedance Phono MM: 50 kΩFrequency Response Phono MM: RIAA (±0.5 dB) Signal/Noise Phono MM: 92 dbOutputs: REC OUT (RCA); DIN Harmonic Distortion: 0.012 (Phono-REC OUT)
0.02 (AUX/Tape-REC OUT) % at rated outputOutput Voltage Rec Out: 120 mVImpedance Rec Out: DIN 52 kΩEqualizerTone Controls: Bass; Treble Frequencies: ±13 dB/50 Hz
±10 dB/ 20 kHz Filters: LOW
HIGH Loudness: Continuously-Adjustable Power AmplifierSpeaker Outputs: 2 x 2 Speakers; 2 Phones Continuous Power 4Ω: 50 + 50 (DIN, 1 kHz, both channel driven) WattsContinuous power 8Ω: 40 + 40 (DIN, 1 kHz, both channel driven)
35 + 35 (IHF, 20-20,000 Hz, both channels driven) WattsFrequency Response: 20-20,000 (±0.5 dB) HZDamping factor: 40 Harmonic Distortion: 0.05 % at rated outputTunerDisplay: analog Frequency Range FM: 87.5-108 MHzFrequency Range AM: 525-1,605 KHzStation Preset: 0 Signal Strength Meter: 1 FM (combined with AM Signal Strenght) : 0=NO, 1=YESCenter Tuning Meter: 1 AM (combined with FM Center Tuning) : 0=NO, 1=YESInp. Sensitivity Mono: DIN (40 kHz, 26 dB) 1.5 μVInp. Sensitivity Stereo: IHF (300 Ω) 1.8 μV
IHF (75 Ω) 0.9 μV
DIN (40 kHz, 46 dB) 50 μVFrequency Response: 30-15,000 (+1.0/-3.0 dB) HZHarmonic Distortion: MONO 0.15 %
STEREO 0.25 % at rated outputSeparation: > IHF 70 db
DIN 50 dbSignal/Noise Mono: 71 dbSignal/Noise Stereo: 67 dbCrosstalk: 75 dbPilot Signal Rejection: 50 dbIF Rejection: > FM 75 db 
AM 40 db2. PhysicalDimensions in Inches: 17.6 x 5.7 x 15.6 (w) x (h) x (d)Dimensions in mm: 448 x 146 x 395 (w) x (h) x (d)Weight in lbs: 25.3 lbsWeight in Kg