ENERGY Energy ESW-8 8" Powered Subwoofer 50-watt RMS 2007/2008 - high-gloss

Brand-new.For sale Subwoofer"Only".I'll open factory sealed box which contains 6 speakers and send ONLY subwoofer.Due to shipping costs,returns are not accepted,sold as is.Feel free to message me with any questions or if you need more information.

• Powered subwoofer:frequency response: 33-150 Hz (±3dB)50-watt RMS amplifier-200W peak8" woofer with Ribbed Elliptical Surroundvariable low-pass crossover: 40-150 Hz12-1/4"W x 14-5/16"H x 13-7/16"D Enclosure Type: Bass-reflex (ported) cabinetCabinet Material: MDF (Medium Density Fiberboard) with a black ash vinyl finish and high-gloss baffle trimAmplifier Power: 55 RMS-200 watts peak / 60 watts RMS continuousFrequency Response: 33 Hz – 150 Hz (or 36 Hz – 180 Hz depending on exact variant specs) ± 3dBDimensions: Approximately 10.5" W x 12.1" – 12.7" H x 12.3" – 13.3" DWeight: ~16 lbs
• Powered Subwoofer features an 8" powered subwoofer with a 200 (dynamic) watt amplifier. The powered subwoofer contains a down-firing injection molded 8" cone woofer with a ribbed elliptical surround inside a bass reflex enclosure with a front firing port. The 8" woofer is powered by a built-in 50 watt (continuous) 200 watt  (dynamic) amplifier. The powered subwoofer has a frequency response of 33 to 150Hz. The powered subwoofer offers the following controls and connections on its rear-panel.
• Volume Level: This knob can be adjusted to control the level of output from the subwoofer. The level chosen should allow the subwoofer to blend its output with the rest of the 5.1-channel speaker system.
• Low-Pass Filter: This control allows for the adjustment of the low-pass filter. Adjustments can infinitely be made from 40 to 150Hz. This will determine the highest frequency that the subwoofer will reproduce.
• Phase: This switch allows for the adjustment of the phase of the subwoofer, in relation to the five other speakers in the system from 0 or 180 degrees
• Power Mode: This switch can be set to either On, Off, Auto. If the switch is in the Off position, the subwoofer will not power up. If the switch is in the On position, it will constantly remain on. If the switch is set to the Auto position, when a signal is present the subwoofer will turn on and will automatically turn off several minutes after a signal is no longer present.
• Line/Sub In: These inputs are an RCA type LFE/stereo/mono input. If you are connecting your subwoofer to an A/V receiver with an LFE or Subwoofer preamp output, connect a single RCA cable to the LFE/Left input. If you are connecting your subwoofer to an AV receiver without a dedicated subwoofer or LFE preamp output but does features a stereo RCA output, use stereo RCA cable and connect to both the LFE/Left and Right inputs.
• Speaker Level In: The Speaker Level input are designed to be used on receivers or amplifiers that do not incorporate any RCA type subwoofer outputs. If your receiver is equipped with an RCA type subwoofer outputs, these speaker level inputs should not be utilized.
• Power Cord Connector: The powered subwoofer features an attached 7' AC power cord terminate by a two-prong AC plug.
• Status Indicator (Front-Panel): The LED found on the front panel will illuminate in blue when the subwoofer is functioning. If the unit is Auto mode and is not receiving a signal, the light will remain off.
• The Energy ESW-8 powered subwoofer was released in late 2007 (with a release date listed as December 27, 2007) and into 2008 .