EMS Synthi A Mk. 1 + Useful Mods
Great example of the early Mk. 1 sound with many additional modifications. The main ones being:
1. Oscillator sync -- 1 to 2 (left) or 3 (right), 2 to 1 or 3, with sync disabled in center position. Variable soft to hard sync via yellow knobs. Sync for osc. 1 has extra range even beyond hard sync, it can turn the oscillator off at these extreme settings, very useful for live. There's an almost limitless variety of tones.
2. Push-pull cutoff knob, when pulled out, this defeats the default smoothing for cutoff frequency modulation, enabling audio rate filter FM, not possible on stock units. Especially useful is feeding back the filter output to the filter FM, this radically changes the sound of the filter giving it more growl and grit, it can get a more MS-20 type of sound when used sparingly (lower filter output level to taste). I would not want to go back to an instrument without this setting, and the result is far more useful than patching the filter audio output back to its own input.. With oscillator sync and high frequency sine filter FM can also achieve "vocal" formant sounds.
3. Push pull trapezoid knob, when pulled out, this inverts the envelope signal, to give a different contour for cutoff and other modulations. I actually use this feature more often than not. If you use an extremely thin trigger pulse as a gate, and defeat the cutoff smoothing as in #2, you can get percussive envelopes -- it does take some preparation and work.
4. 10 turn pots on inputs #1 and #2 voltage scaling. This is very important to dial in proper pitch tracking for external control voltages. Tracking is still a bit nonlinear as on all Synthis, but you will get a few octaves in tune and so this capability becomes extremely important in terms of playing melodies.
There is also a breakout cable that plugs into the "keyboard" socket. (I was told many years ago don't try plugging in an AKS keyboard, as this is an earlier standard and may cause issues). Here there are convenient 1/8 inch cables for gate, input 1 (labeled "CV"), and input2 (labeled "Filt").
Everything sounds absolutely wonderful, with only exception is the reverb, the "dry" signal sounds a bit distorted or is sensitive to overload. I would suggest getting this looked at. Otherwise all other functions, main outs, filter etc sound absolutely gorgeous, full of character, not equaled at all by any of the reissues or even later versions.
Also, I have not tested the card slot (this would require other accessories) -- or the "slew" mod (needs special pin to 1/8" cable), please assume these may not be working.
There is a padded wooden case made sometime long ago, probably the 1970's, excellent for transport but probably not to ship without added protecion (I will pack this fine historical instrument very carefully). Note when operating fully upright (I usually prefer face up on table, or leaned back so don't have this issue), you will need to stuff some cardboard to secure the unit, I've left this out but its easy for anyone to do.
This item is sold As-Described
This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.Learn More.
| Listed | 3 months ago |
|---|---|
| Condition | Good (Used) Good condition items function properly but may exhibit some wear and tear.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Analog / Digital |
|
| Polyphony |
|
Product safety information may be available here.


