500 Series Tube Valve Clipper - Transformer Colour
*** Please note for international sales import duty and fees may be required before shipment is made *** Please message for details to avoid delay ***
On offer is a unique one-off build prototype 500 series module
Vintage 1950s Mullard valve circuit as a line driver distortion box
Most lower voltage 500 series modules use a starved plate design to run valves for colour outside of their design specs. This unit uses a specially designed vintage 50s valve which is a very high build tolerance to allow proper working conditions and voltages. This allows for a very flexible colour box which can go from clean valve line level to heavy distortion, saturation and harmonics.
Single channel which requires a dual slot to share the power consumption with a slow valve start-up cycle to avoid cold surge
Spec wise some very high quality parts used too, signal chain as follows:-
- Dual slot 500 series module
- Vintage Ex BBC Broadcast console input transformer - Balanced line input
- Then a multi way attenuation control after the input transformer - This allows you to push the transformer hard while backing off the hot signal that hits the valve stage
- Signal then goes to the valve input - This gives a 14db step up in gain - Designed to run from lower level inputs so an input say at -14db would result in a clean output level around 0db. As the input level is increased to starts to push the valve into harmonic distortion and gets more distorted as you approach an input of around 0db
- Then you have an output attenuation control to reduce that hot output to suit
- Also a 3 way toggle switch for adding in diode clipping. This is across the input transformers secondary with a choice of vintage Mullard Germanium or LED. So low level and high level "threshold". The clipped signal then passes through the valve gain so works as a make-up gain stage as well as softening clipping with the valve and output transformer
These controls allow quite a bit of shaping and where distortion clipping and saturation occurs. Parts used are what would usually be in a racked version
- Quick audio test done to check out. Can do more on request
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Listed | 5 days ago |
|---|---|
| Condition | Excellent (Used) Excellent items are almost entirely free from blemishes and other visual defects and have been played or used with the utmost care.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Made In |
|
Product safety information may be available here.

