Santa Fe Springs, CA, United States
About this listing
\n\nThe Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Digital Wireless Systems.\n\nWith an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.\n\nNote: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.\nKey Features\n\n\n Predictive switching diversity\n High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters\n Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync\n Interference detection and alerts provided on both the receiver and Wireless Workbench 6\n Front panel gain adjustment buttons provide up to 60 dB additional gain\n AES 256-bit encryption-enabled for applications where secure transmission is needed\n Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench 6 integration, and AMX/Crestron control\n Support for frequency coordination with the Axient Spectrum Manager\n Yamaha device ID allows simplified channel patching on CL consoles\n Rugged metal chassis\n Intuitive front panel LCD menu and controls with lockout feature\n Upgraded LCD with adjustable contrast and brightness\n Audio and RF LED meters with peak indicator\n Remoteable 1/2 wave antennas\n Furnished rack hardware\n\nTechnical Specifications\nFrequency\nL50: 632-696 MHz\nDimensions\n197 mm x 171 mm x 42 mm (7.75 in. x 6.75 in. x 1.65 in.), H x W x D\nWeight\n913 g (2.0 lbs), without antennas\nHousing\nGalvanized Steel\nSpurious Rejection\n>80 dB, typical\nConnector Type\nBNC\nImpedance\n50 ohms\nBias Voltage\n12 - 13 V DC, 170 mA maximum, per antenna\nGain Adjustment Range\n-18 to +42 dB in 1 dB steps (plus Mute setting)\nConfiguration\n1/4 inch (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)\nXLR: Balanced (1=ground, 2=audio +, 3=audio -)\nImpedance\n1/4 inch (6.35 mm): 100 ohm (50 ohm Unbalanced)\nXLR: 100 ohms\nFull Scale Output\n1/4 inch (6.35 mm): +12 dBV\nXLR: LINE setting= +18 dBV, MIC setting= -12 dBV\nMic/Line Switch\n30 dB pad\nPhantom Power Protection\n1/4 inch (6.35 mm): Yes\nXLR: Yes\nPower Over Ethernet (PoE)\nNo, protected\nNetwork Interface\nSingle Port Ethernet 10/100 Mbps\nNetwork Addressing Capability\nDHCP or Manual IP address\nMaximum Ethernet Cable Length\n100 m (328 ft)
Price$1,408.75
Free Shipping
Free Shipping
from Santa Fe Springs, CA
