Heath, OH, United States
About this listing
The Reverend Roundhouse H90 electric guitar blends two of Reverend’s strongest pickup voices into a lighter, more comfortable single-cut platform. Its korina solidbody and solid maple archtop provide lively resonance with added snap, while the thinner body and rear belly contour make the guitar easier to handle through long rehearsals and shows. The bridge position carries a Reverend Steelhead humbucker for bold output and modern definition, while the neck position uses a Steelhead P90 with sidewinder coil construction for true P90 snap and grit without the hum. With Bass Contour control, an ebony fingerboard, Reverend pin-lock tuners and a three-piece korina neck, the Roundhouse H90 gives players a flexible humbucker/P90 spread that can move from thick drive to clear, cutting texture without losing the feel of a focused single-cut instrument. Korina Body and Solid Maple Archtop The Roundhouse H90 starts with a korina solidbody and solid maple archtop, giving the guitar a balance of resonance, warmth and sharper note definition. Korina keeps the guitar lively and harmonically rich, while the maple top adds focus to the attack. The thinner body design and sculpted rear contour reduce weight and improve comfort, helping the guitar feel more natural during long standing sets, studio tracking or extended writing sessions. Steelhead Humbucker and Steelhead P90 Pairing The pickup configuration is the main story of the Roundhouse H90. A Steelhead humbucker in the bridge position delivers bold output, punch and clear drive tones, making it useful for riffs, leads and heavier rhythm work. In the neck position, the Steelhead P90 brings a more open, gritty response with the snap players expect from a P90-style pickup, while its sidewinder coil construction helps eliminate unwanted hum. Together, the pickups give the guitar a wide but musically connected voice. Bass Contour for Practical Tone Shaping Reverend’s Bass Contour control gives the Roundhouse H90 more flexibility than a standard humbucker/P90 layout. Rolling the control back tightens the low end and can make the bridge humbucker feel leaner or the neck P90 more cutting, while leaving it open preserves fuller pickup body. The 3-way selector, volume, tone and treble bleed circuit support fast transitions between pushed amp tones, cleaner rhythm parts and lower-volume passages that still need high-end clarity. Ebony Fingerboard and Three-Piece Neck The ebony fingerboard gives the Roundhouse H90 a fast, slick playing surface with tight note attack and long-term durability. A 12" radius and 22 frets make the guitar comfortable for bends, chord voicings and melodic work, while the medium oval profile keeps the neck familiar and controlled. Reverend’s three-piece korina neck construction improves stiffness and stability, and the dual-action truss rod with headstock access makes setup adjustments easier across changing conditions. Reliable Hardware for Stage and Studio Reverend pin-lock tuners, a Boneite nut and a TOM bridge with stop tailpiece help keep the Roundhouse H90 stable through regular playing, string changes and transport. The Pure Tone jack, custom steel jack plate, low-profile dome knobs, Alpha pots and polyester capacitors reinforce the guitar’s practical side, while the thin UV-cured finish lets the body resonate freely. With bold finishes, arched-top style and Reverend’s hand-initialed headstock detail, the Reverend Roundhouse H90 electric guitar is built for players who want single-cut energy with a broader, more modern pickup range. Weight: 7lbs 5oz Features Single-cut electric guitar with humbucker power and hum-cancelling P90 snapKorina solidbody and solid maple archtop provide resonance and focusSteelhead bridge humbucker delivers bold output and clear drive tonesSteelhead neck P90 adds true P90 grit with hum-canceling designBass Contour control tightens low end or reshapes pickup voiceEbony fingerboard supports fast feel and tight note attackThinner body and rear belly contour improve comfort for long setsThree-piece korina neck increases sustain and long-term stabilityReverend pin-lock tuners support tuning stability and fast string changesTreble bleed circuit keeps highs clear at lower volume settings Body Body construction: SolidbodyBody material: KorinaTop material: Solid maple archtopBody contour: Rear belly contourBody finish: Thin UV-cured finishAvailable colors: Metallic Bordeaux, Metallic Bronze, Metallic Limeade Neck Neck material: 3-piece korinaNeck profile: Medium ovalScale length: 24.75"Truss rod: Dual-action with headstock access Fingerboard Fingerboard material: EbonyFingerboard radius: 12"Number of frets: 22Fret size: 0.110" wide x 0.050" tallNut material: BoneiteNut width: 43 mm Hardware Bridge: TOM with stop tailpieceTuning machines: Reverend pin-lockOutput jack: Pure ToneControl knobs: Reverend custom dome Electronics Pickup configuration: H/P90Neck pickup: Steelhead P90Bridge pickup: Steelhead humbuckerPickup selector: 3-wayControls: Volume, tone, Bass ContourPotentiometers: Alpha 10% toleranceCapacitors: 10% tolerance polyesterTreble bleed circuit: YesPickup type: Passive Strings Factory strings: .010–.046 Other Case: Two-Toned Teardrop sold separately All instruments are setup to factory spec and inspected before shipping. Player preference may vary and instruments may need additional adjustments to accommodate those preferences. Setups are not applicable for free returns.We offer the option to upgrade to a Plek setup at a discounted rate when purchasing an instrument. To learn more about Plek, please message us, or call at: 740-522-0277.Plek add-ons are non-refundable once completed. In the event of a return, a refund will be issued minus the cost of the Plek and any other add-on services.
Price$1,299
Free Shipping
Free Shipping
from Heath, OH
Only 1 left
Grab it before it's gone
14-Day Return Policy
Enjoy peace of mind with your new gear
