Boss Ce-1 Ce 1 Chorus Ensemble Clone + Depth & Buffer mod ! for R.Hagg

This is a custom order listing for Mr R . Haag
it is for the chorus ensemble (dual footswitch version) in  1590bb raw enclosure (see pictures) 
the second picture with graphics depicts the pedal for sale, however its 
internal components will be swapped into the raw enclosure as shown in the first picture!

with free postage to Sydney Australia

Also please note this is my newest layout , keeping with the original 😊

for a comparison of the original cut and paste the Bold description below and search on youtube! :)

Chorus Ensemble Ce1 Boss comparison Mn3002 

Uses the obsolete mn3002 delay chip
Unlike Retro Sonic chorus and others,
This chorus is faithful to original And hasn’t been modified from the original
It isn’t true bypass
Yes , it includes the NPN Transistor pre amp section just like the original!!!
Runs off 9vdc ( boss style)
Internal circuitry converts the input voltage to both +/- 14 and +/- 13v Just like the original
It has jfet switching just like the original
Red led is peak level indicator
has a dual led colour
Chorus - Blue
Vibrato - Red
It has stereo outputs
Use both or just use mono

In Reverbs (Andy's Ce1 Review Video) Andy states that the Ce1 chorus has the same analogue circuit as the Roland Jazz Chorus.
This is somewhat correct. However only the very early 1970's Jazz chorus amps have the mn3002 chip. And the preamp section is not the same. Most Jazz chorus amps use the mn3007 chip with their modulation section more aligned to the ce2 circuitry.

Please note!
Boss WAZA CRAFT CE2   (CE1 mode) is not a real CE1 Chorus.

The real CE-1 Chorus only uses a MN3002 Bucket Brigade chip,and unique preamp stage.
The Waza Craft CE2 is a nice pedal ,however it is not the same as the Original Holy Grail Boss Chorus Ensemble CE-1



It also has an internal Depth Mod switch. This allows the option of the Stock setting or switch the Depth Mod on this allows the Chorus to use the Depth control. When the The depth is fully Clockwise, this will be the same setting as the Stock Chorus

The buffer mod is more noticeable when the high input level is selected.
this is an internal switch which allows a buffer circuit to be switched on or off.again when this mod is not switched on it is completely bypassed, returning the effect to its stock setting.
look for this Youtube video from another user demonstrating this, titled ....
Boss CE-1 Chorus Ensemble - The Buffer Trick

pedal draws approx 70ma

PLEASE NOTE!!!
THIS PEDAL MUST BE POWERED BY A HIGH QUALITY ISOLATED TRANSFORMER BASED POWER SUPPLY!
INFERIOR AND SWITCHMODE SUPPLY MAY CAUSE NOISE!