LOOP-MASTER PEDALS 3-BUTTON FOOTSWITCH FOR ROLAND JAZZ CHORUS AMPS



Take control of your Roland Jazz Chorus amplifier's built-in effects with the Loop-Master Pedals 3-Button Footswitch.


Designed as a compact alternative to using three separate footswitches, this controller provides independent footswitch operation for Chorus/Vibrato, Reverb, and Distortion.


Featuring three heavy-duty latching footswitches and individual Red, Green, and Blue LED indicators, this controller puts all three functions into one slim 6-inch aluminum enclosure.


The LED indicators are powered externally using a standard 9V DC pedal power supply, while the amplifier switching operates completely independently of the LED power.


Designed for compatible Roland Jazz Chorus amplifiers, including the JC-40 and JC-120. JC-160 compatibility depends on the amplifier's specific footswitch configuration.


FEATURES


• Three independent latching footswitches

• Chorus/Vibrato ON/OFF control

• Reverb ON/OFF control

• Distortion ON/OFF control

• Three individual LED indicators – Red, Green, and Blue

• Externally powered LEDs

• Compact 6-inch strip enclosure

• Three independent 1/4" footswitch connections

• Passive mechanical switching

• No power required for the switching functions

• Premium jacks

• Handcrafted in the USA by Loop-Master Pedals


THREE INDEPENDENT EFFECT CONTROLS


SWITCH 1 – CHORUS / VIBRATO


Engages or disengages the amplifier's built-in Chorus or Vibrato effect.


SWITCH 2 – REVERB


Engages or disengages the amplifier's built-in Reverb effect.


SWITCH 3 – DISTORTION


Engages or disengages the amplifier's built-in Distortion effect.


Each switch operates independently, allowing multiple amplifier effects to be used simultaneously.


RED, GREEN & BLUE LED INDICATORS


Each footswitch has its own dedicated LED indicator.


• Red LED

• Green LED

• Blue LED


The LEDs are powered by an external 9V DC power supply and indicate the corresponding footswitch's selected position.


LED operation does not depend on power supplied by the amplifier.


IMPORTANT: The LEDs indicate the mechanical switch positions. Actual amplifier effect status depends on the amplifier's switching polarity and configuration.


HOW IT WORKS


Connect each output of the Loop-Master footswitch to the corresponding footswitch input on your amplifier.


CHORUS / VIBRATO

Connect to the amplifier's Chorus/Vibrato footswitch jack.


REVERB

Connect to the amplifier's Reverb footswitch jack.


DISTORTION

Connect to the amplifier's Distortion footswitch jack.


Press the corresponding footswitch to engage or disengage the selected amplifier effect.


Each footswitch remains in its selected position until pressed again.


COMPATIBLE AMPLIFIERS


• Roland JC-40 Jazz Chorus

• Roland JC-120 Jazz Chorus

• Roland JC-160 Jazz Chorus – verify footswitch configuration before ordering


Designed for compatible amplifiers that use three independent latching footswitch inputs.


COMPACT STRIP DESIGN


Three footswitches and three LED indicators in one compact enclosure.


Ideal for crowded pedalboards, smaller stage setups, and players who want convenient access to their Jazz Chorus amplifier's onboard effects.


DIMENSIONS


6" × 1.25" × 1.125"


15.24 × 3.18 × 2.86 cm


152.4 × 31.75 × 28.58 mm


POWER


• Standard Boss/Ibanez-style 9V DC

• 2.1mm center-negative power connection

• Powers the Red, Green, and Blue LEDs only

• No external power required for amplifier switching

• All three footswitches operate normally without LED power


Power supply not included.


CONNECTIONS


• Chorus/Vibrato – 1/4" TS output

• Reverb – 1/4" TS output

• Distortion – 1/4" TS output

• 9V DC power jack


Three standard 1/4" mono cables are required.


Cables are not included.


CONSTRUCTION


• Heavy-duty aluminum enclosure

• Three heavy-duty latching footswitches

• Three LED indicators – Red, Green, and Blue

• Three independent 1/4" output jacks

• Premium components

• Passive switching circuitry

• Externally powered LED circuit

• Handcrafted in the USA by Loop-Master Pedals


IMPORTANT COMPATIBILITY INFORMATION


This footswitch is intended for compatible Roland Jazz Chorus amplifiers using three separate latching footswitch connections.


The LEDs are powered externally and do not receive power from the amplifier.


The footswitch does not replace the amplifier's onboard effect controls.


Please verify the footswitch connections on older JC-120 and JC-160 amplifiers before ordering.


This is a Loop-Master Pedals product and is not manufactured, endorsed, or affiliated with Roland or Boss.


HANDCRAFTED IN THE USA


Built by Loop-Master Pedals for reliable, straightforward control of your Roland Jazz Chorus amplifier's built-in effects.


Three switches. Three LED indicators. One compact controller.

Annunci simili in promozione













CondizioneNuovo (Nuovo)
Gli articoli "Nuovi” sono venduti da un rivenditore autorizzato o dal produttore originale e comprendono l’imballo originale.Scopri di più
Marchio
Modello
  • 3-Button Footswitch for Roland JC-40 / JC-120 / JC-160
Categorie
Prodotto in
  • Stati Uniti

Le informazioni sulla sicurezza del prodotto sono disponibili qui.

Informazioni sul venditore

Loop-Master Pedals

Summersville, KY, Stati Uniti
Iscrizione a Reverb::2013

Protezione di Reverb

Resi semplici, transazioni sicure, assistenza di persone in carne e ossa

Scopri di più

Checkout sicuro

Reverb Gives

Con i tuoi acquisti dai un contributo ai programmi musicali rivolti ai giovani, aiutandoli a ricevere gli strumenti di cui hanno bisogno.

Ops, forse hai dimenticato qualcosa. Verifica i campi evidenziati in rosso.