Burbank, CA, États-Unis
À propos de cette annonce
Module A-165-2 includes six modification circuits for digital signals (clock, gate, trigger, start, stop etc.) which are derived from the two input signals Input 1 und 2:inverted signal of Input 1 (labelled 1)inverted signal of Input 2 (labelled 2)T flipflop (toggle flipflop), controlled by Input 1, this output changes it's state whenever a the rising edge of Input 1 appears (labelled 1/2, as it works similar to a 1:2 frequency divider)Set/Reset flipflop, this output changes it's state to "high" during the rising edge of Input 1 and turns "low" during the rising edge of Input 2 (labelled RS)inverted output of the Set/Reset flipflop (labelled RS)pulse output, during both the rising and falling edge of Input 1 a short trigger pulse with about 50 ms lenght is generated (labelled with the sign ± and a rectangle pulse symbol)The outputs 2, 1/2, RS and the pulse output are equipped with LEDs that display the state of the output in question. The output level for all six outputs can be set to 0/+5V or 0/+11V by means of a jumper on the pc board.Voltage thresholds for the input voltages: voltages below +0,8 V are treated as "low", voltages above +3 V are treated as "high"
PrixC$167.76
+ C$43.75 Expédition
Plus qu’un exemplaire
Ne le laissez pas passer
Politique de retour de 30 jours
Profitez de votre nouveau matériel en toute sérénité
