Takaab 3LFO V3 - Triple Low Frequency Oscillator Eurorack Synthesizer Module

3 variable LFOs in one handy 6HP eurorack module. Each oscillator outputs both square and triangle waves. Output of each wave is 10V peak-to-peak. LED indicator lights red while the squarewave is negative (triangle rising phase) and green while squarewave is green (triangle falling).

A set of jumpers on the back of the module allow you to select the frequency range for each LFO:

SHORT (No Jumper): 4 ms (250hz) - 0.76 seconds
MID (Jump Mid): 44ms (25hz) - 8.36 seconds
LONG (Jump Long): 0.40 seconds (2.5hz) - 77 seconds

You can also jump both MID and LONG on the same LFO to get a slightly longer range.

Version 2 legacy Information

No Jumper: 4 ms (250hz) - 0.76 seconds
MID: 44ms (25hz) - 8.36 seconds
LONG: 0.40 seconds (2.5hz) - 77 seconds
MID+LONG: 0.404 seconds - 85 seconds2 outputs per LFO (square* wave and triangle wave).
Size: 3cm x 128.5cm x 5.5cm.
Requires +/-12v standard eurorack power supply.
Package contents: 1x module, 1x 16 pin power cable, 2x 3M screws, 4x Jumpers.

Version 1 legacy Information
3 variable LFOs of varying frequency ranges in one handy 6HP eurorack module. LFO 1 is the fastest with LFOs 2 and 3 being slower by a factor of 10 and 100 respectively. Each oscillator outputs both square(ish) and triangle waves.
Approximate frequency ranges:
LFO 1: 4 ms (250hz) - 0.76 seconds
LFO 2: 40ms (25hz) - 7.6 seconds
LFO 3: 0.4 seconds (2.5hz) - 76 seconds