Crown XLS 2502 2-Channel 775w Power Amplifier

Toronto, Canada

Informazioni su questo annuncio

The XLS 2502 is a two-channel power amplifier from the Crown XLS DriveCore 2 series, rated at 775W per channel into 4 ohms. Its DriveCore Class D design keeps the weight under 11 lb (5 kg), and Crown recommends it for portable PA systems.The onboard DSP includes the PureBand crossover system, a band-pass filter on each channel and PeakX limiters that protect your speakers. A large LCD handles setup, and in dark venues you can switch off every LED except clip and thermal. Speakers connect by Speakon or binding posts.Features DriveCore Class D amplifier weighing under 11 lb (5 kg) DSP with a band-pass filter on each channel Integrated PureBand crossover system PeakX limiters for maximum output with speaker protection XLR, 1/4 in. and RCA inputs Selectable input sensitivity: 1.4V RMS or 0.775V RMS LED dimming: switch off every LED except clip and thermal Sleep mode after a set time, with no button press Security setting locks the menu buttons until a code combination is entered System reset restores the factory settings Remote power trigger Forced-air fans Specifications Channels: 2 Output power per channel: 1200W at 2 ohms, 775W at 4 ohms, 440W at 8 ohms Bridge mono output power: 2400W at 4 ohms, 1550W at 8 ohms Inputs: XLR, 1/4 in. and RCA Outputs: Speakon and binding posts Input sensitivity: 1.4V RMS, or 0.775V RMS selectable Signal-to-noise ratio: More than 103 dB (6 dB lower at 0.775V RMS sensitivity) THD: Less than 0.5% Intermodulation distortion: Less than 0.3% Frequency response: +0 dB, -1 dB Damping factor: More than 200 Crosstalk: More than 85 dB at 1 kHz, more than 55 dB at 20 kHz Dimensions (W x H x D): 19 x 3.5 x 10.7 in. (48.3 x 8.9 x 27.2 cm) Weight: 10.8 lb (4.9 kg)

Visualizza l’annuncio completo

C$1,299.99

Spedizione gratuita