Köln, Deutschland
Zu diesem Inserat
Transducer principle: Capacitor (back electret)Operating principle: Pressure transducerPolar pattern: OmnidirectionalFrequency response: 20 - 20,000 Hz (50 - 16,000 Hz ± 1.5 dB)Diffuse field equalised Field leakage transmission factor at 1 kHz (0 dB = 1 V/Pa) 15 mV/Pa (= -36.5 dBV) ± 1 dBNominal impedance: 330 ohm, nominal terminating impedance = 2.2 kohmMax. Maximum sound pressure level at 1 kHz: 128 dBS/N ratio related to 1 Pa: > 57 dBA-weighted equivalent sound pressure level: approx. 28 dB(A)Power supply: 12 - 48 V phantom powerSupply current: approx. 3.4 mAConnector plug: 3-pin XLRDimensions: Length 133 mm, Shaft diameter 19 mm, Head diameter 9 mmWeight without cable: 88 g Condenser measurement microphone for PA and studio analysisThe beyerdynamic MM 1 is a high-quality electret condenser measurement microphone with omnidirectional polar pattern and calibrated field leakage transmission factor.Neutral imagingThanks to the slim housing with the offset microphone capsule, the influence on the sound field is very low, so that pressure build-up at high frequencies is largely avoided. The linear frequency response ensures neutral imaging.Field of application:The MM 1 microphone was developed for calibrating PA and PA systems. In conjunction with a spectrum analyser, the sound pressure level of loudspeakers can be monitored in addition to frequency response measurements. The MM 1 is a valuable tool for analysing sound signals in research, development and industry.Individually measured frequency responseEach microphone comes with a printout of an individually measured 0° frequency response.
Preis€229.99
inkl. MwSt.
+ €2.50 Versand
Versandkostenfrei
von Köln, Deutschland
30 Tage Rückgaberecht
Genieße Sorgenfreiheit mit deinem neuen Equipment
