Crest Audio Professional Power Amplifier Model CA-6 Amplifier, Made in the USA

Crest  Audio Professional Power Amplifier Model CA-6 Amplifier, Made in the USA

Crest’s legendary “overbuilt” power supply

->The price shown is per unit
-> Copy of the buyer's manual
->100% functional, Very Clean
->There are different scratches here and the
->See the pictures
->Please serious buyer
->Delivery everywhere in Canada and the United States,
->Shipping prices outside the United States and Canada are indicated by a fictitious amount of $5. To get your shipping price, you must give us your complete delivery address (street address, city, state, country and your code)
->The Price Indicated for transport may vary depending on the region where you are located.
->All our products are shipped in safe quality packaging.

Model CA 6 : 1500W Power Amplifier Specifications:

8 Ohms Stereo Power: 400W 1kHz, 0.03% THD+N; 350W 20Hz-20kHz, 0.1% THD+N

4 Ohms Stereo Power: 600W 1kHz, 0.03% THD+N; 500W 20Hz-20kHz, 0.1% THD+N

2 Ohms Stereo Power: 750W 1kHz, 0.03% THD+N; 600W 20Hz-20kHz, 0.1% THD+N

8 Ohms Bridged Mono Power: 1200W 1kHz, 0.03% THD+N; 1000 W 20Hz-20kHz, 0.1% THD+N

8 Ohms Bridged Mono Power: 1500W 1kHz, 0.03% THD+N; 1200W W 20Hz-20kHz, 0.1% THD+N

Max RMS Output Voltage (each channel): 73V

Peak Output Voltage (each channel): 103V

Frequency Response (+0 / -0.3dB, 1W/81/2):

20Hz-20kHz, -3dB@135kHz

Power Bandwidth (rated power at 4 Ohms, 1% THD+N): 20Hz-20kHz, -1.1dB/+0dB

TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input.

THD+N (rated power at 4 Ohm, 1kHz): <0.01%
SMPTE IMD (rated power at 81/2, 60Hz & 7kHz): <0.01%
Damping Factor (10-400Hz at 8 Ohms): 400:1

Input CMRR (1kHz): > - 60dB

Input Sensitivity (rated power at 8 Ohms ): 0.775V standard (switchable)

Voltage Gain: X68 standard (switchable)

Input Impedance (balanced/unbalanced): >20kohms/>10kohms

Hum and Noise ("A" weighted, full power, 4 Ohms): -105dB

Crosstalk ("A" weighted, full power, 4 Ohms"): > - 60dB

Class: H

Input Connectors (per Channel): Female XLR (pin 2+, switchable for pin 3+), TRS (tip+)

Filter Storage: 68,000 mF

Power Supply (factory configured): 100V-240V, 50-60Hz

Idle Current Draw 120V: 1.6A

1/8 Power Current Draw (typical music, 120V/4 Ohms) 6.0A

1/3 Power Current Draw (continuous music, 120V/4 Ohms): 13.0A

Max Current Draw (circuit breaker rating, 120V/4 Ohms): 18.0A

Thermal Emissions (1/8 Power, 4 Ohms): 2630 BTU/hr

Thermal Emissions (1/3 Power, 4 Ohms): 3713 BTU/hr

Cooling: Back-to-front via 2 rear panel mounted variable-speed DC fans

Controls: Front Panel: 2 attenuators; Rear Panel Switches: signal ground lift,

mode select switch

LED indicators (per channel) Clip/Limit, Signal, Temp/DC, Active

Construction: Steel chassis, 16 gauge. Double thickness in rack ear areas.

Dimensions (W x H x D): 19" x 3.5" x 18", (483 x 89 x 458 mm)

Weight: 44 lbs. (20 kg)