Leominster, MA, United States
About this listing
New Electronic Audio Experiments Longsword V4.6 Overdrive Guitar Effects PedalThis item is new, in box!Orders placed before 12:00 PM Eastern Standard Time will ship same day! Orders placed after 12:00 may ship same day and if not, they will ship next day.I am an Authorized Dealer, a store receipt will be included with your purchase.Check my feedback and bid with confidence!From Electronic Audio Experiments:The Electronic Audio Experiments Longsword is yet another contender in the endless void of op-amp based drive pedals—familiar but with some novel twists. Cascaded gain stages allow for the full range from clean boost to massive distortion, all without sacrificing tonal flexibility. The equalizer combines bass and treble shelving filters with an active, frequency-selectable midrange boost/cut control. This lets the user sculpt a diverse array of tones and carve out a niche in even the most dense of mixes. The Longsword has a broad frequency response which makes it work equally well with guitar, baritone, and bass.ControlsLevel: output volumeDrive: go from light grit to heavy overdriveLow/High: James/Baxandall tone stack (shelving filters)Mid: active midrange boost/cutShift: selects frequency controlled by Mid potDiode: selects between clipping diodes, to alter dynamics and headroom-Up: MOSFET clipping, medium compression-Center: no diodes, minimal compression-Down: Silicon diode clipping, maximum compressionBoost (Footswitch): engages a front end mid boostBoost (Knob): adds up to 20dB of gain when the Boost is engagedChangelogV4.6 (updated June 2026, serial #3253)Added intelligent momentary/latching behavior to footswitchesReduced switch pop when engaging Boost circuitV4.5 (January 2021, serials #362-3252)- New mechanical format (changed enclosure shape, knob spacing, jacks, etc)- Added power supply over-voltage shutdown circuit and ESD protection- Increased Low/High control crossover frequency by approximately 500Hz to reduce interactivity of High and Mid controlsV4- New 6-knob layout- Surface mount PCB- Boost knob moved to exterior- Soft-touch relay bypass switchingV3- Added 9V to 18V (+/-9V bipolar) power supply for increased headroom- Gain 1/2 setting replaced with Boost modeV2.1- Eliminated Range toggle, fixed at optimal intermediate settingV2- Added diode clipping switch- Added “Gain 1/2” switch to access 2nd preset, accessible via internal trimpotV1- Initial releaseElectrical SpecificationsBypass: Relay switching with true bypassInput impedance @ 1 Khz: 500kΩOutput impedance @ 1 Khz: 1kΩPower: 9V DC, 2.1 mm center negative barrel. The current draw is 75 mA.We recommend a regulated, isolated power supply (not included) rated for 100 mA minimum. The PSU input is protected against reverse polarity and over-voltage up to 24V. Our pedals do not accept batteries.
Price$249
Free 2-Day Shipping
30-Day Return Policy
Enjoy peace of mind with your new gear
