Chatham, Canadá
Información sobre este anuncio
OverviewThe MyMonitorII allows blending of any microphone source with any stereo source in a convenient personal monitoring solution. The microphone thru provides direct connection to any mixer and will pass phantom power from the board for powering condenser microphones.Built for maximum flexibility, the ARTcessories MyMonitorII can be powered with the supplied 12vDC power supply, or from an internal 9v battery.The pop-less microphone on/off switch lets you locally mute the microphone. The headphone section has independent 1/8-inch and -inch TRS outputs with plenty of drive for both.Key FeaturesBlends any Microphone, Instrument and Stereo Source for Personal Monitoring Microphone Input and Thru with Pop-less On/Off Mute Switch. Passes Phantom Power for Operation with Condenser Microphones Instrument/Line Input and Thru Jacks Stereo Monitor Input with Blend Control Headphone output section has 1/8-inch and 1/4-inch Jacks High Performance, Low Noise Circuitry 9v battery and 12vDC Power OperationSpecificationsMaximum Input Level+6 dBu (mic), +12 dBu (instrument),+32 dBu (line), >+32 dBu (stereo monitor)Input Impedance4.5k Ω (mic), 1m Ω (instrument),100k Ω (stereo monitor, line)Maximum Output Level+12dBu (headphones)Maximum Gain47dB (mic), 41dB(instrument), 21dB(stereo monitor, line)Output Impedance47 Ω (each headphone output)Input ConnectionsXLR balanced microphone, 1/4-inch stereo monitor,1/4-inch mono instrument/line inputOutput ConnectionsXLR balanced microphone, 1/4-inch and 1/8-inch headphones, 1/4-inch mono instrument/line thruSignal To Noise Ratio> 96dBPower12VDC @ 150mA (Adaptor Included) or 9VDC BatteryDimensions1.85″H x 4.6″W x 4.1″D (47mm x 117mm x 104mm)Weight1.10 lbs (0.50kg)
PrecioC$119
+ C$20 Envío
C$1 gastos de envío al combinar
Solo queda 1
Aprovecha antes de que sea demasiado tarde
Política de devoluciones de 30 días
Disfruta de tu nuevo equipo sin preocupaciones




