After Later Audio Merge

A mixer with three channels of either attenuators and/or attenuverters (each channel is switchable). 

There is a jumper on the back to normal a 10V signal into the first channel so you can add some harmonics through clipping one side of the wave.  It also has pin header IN and OUT so it can be chained with multiple units and work directly with our mixer lineup. 

This is an easy way to add some simple mono channels with no sends.

3-channel attenuator, mixer and CV source

• 3 channels
• Attenuator/attenuverter, mixer, CV source
• Unipolar or bipolar mode per channel
• Inputs & outputs are normalized
• 10V fixed voltage normalized to the inputs
• Several merge modules can be cascaded together
  

MI Shades on 4TE

The Merge from After Later Audio is a 3-channel mixer and attenuator designed for both audio and CV signals. With its three inputs normalized to each other, the module works perfectly as a mixer, allowing each input to be mixed normally or inverted. Merge also functions as a triple attenuator/attenuverter, meaning it can act as either an attenuator or a polarizer, selectable via the "+ _ -/+" toggle switch. A third key function allows each channel to serve as a manual CV source. The toggle switch determines whether the output ranges from 0–10 V or –10 to +10 V, making it ideal for moving multiple parameters simultaneously when used with a Multiple. Multiple Merge modules can also be linked via rear connections to create a larger mixer unit.

Width: 4hp

12V: 25mA

-12V: 15mA