The Analogue System Module to Doepfer Bus Adaptor (ASM2DB adaptor) enables you to use Analogue Systems (AS) modules/cables in Doepfer racks.

Note the red stripe on Analogue Systems cables and ASM2DB adaptors goes at the TOP when connecting to a Doepfer-type header

• RoHS compliant.
• Fully tested.
• Please be aware that connecting the adaptor or cable incorrectly may damage your synth so please be careful and always double check - download these instructions.
• Note that connecting an Analogue Systems module to anything other than an Analogue Systems rack will invalidate your Analogue Systems module's warranty.
• FAQ: Does the adaptor swap the power pins? Yes the +12V, +5V, -12V and 0V are all re-routed to the right places. The gate and CV connections are not supported on the AS bus and are left open-circuit on the adaptor.